Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Ebbw Vale

If the roof over your premises in Ebbw Vale is ponding, splitting or letting water in, we can survey it free when you are considering replacement, or provide a paid condition report if you need evidence to plan budgets. Single-ply, built-up felt and liquid-applied systems are all available, matched to the building.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Ebbw Vale at a glance

Postcode districts
NP23
Population
about 33,068 (GeoNames)
Council area
Blaenau Gwent County Borough Council
Building approval
Blaenau Gwent County Borough Council building control, or a registered building control approver
Nearest main town
Merthyr Tydfil, about 8 miles
Guide price region
Wales (−8% on West Midlands rates)

What do commercial flat roofs in Ebbw Vale need?

When a roof over heated space in Ebbw Vale is replaced, insulation rules usually apply. We design the warm-roof build-up towards the required standard where that is feasible and handle building control where it is needed, so the work is signed off properly and the building is better insulated afterwards.

Around Ebbw Vale, flat roofs are common on newer estates where the first extension roofs are now being replaced and on 1960s and 1970s link-detached houses with flat-roofed garages and porches. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.

How much does a commercial flat roof cost in Ebbw Vale?

Guide price in Ebbw Vale: £12,150–£20,050 for a 100 m² commercial roof in single-ply with insulation, including VAT at Wales rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,150–£20,050
Condition survey and leak investigation£140–£280
Block of flats (150 m²), felt + insulation + scaffold£14,300–£25,000

Which roofing system suits a commercial flat roof?

Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.

  • Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
  • Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
  • Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.

Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).

What's included?

  • Written workmanship guarantee, with manufacturer guarantees registered where the system allows
  • CDM planning, edge protection and fragile-surface controls on every job
  • Programme planned around trading hours, deliveries and site rules
  • Warm-roof insulation upgrades and building control where needed

Building regulations in Wales

The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Ebbw Vale: questions

Do you cover Ebbw Vale?

Yes. Ebbw Vale is part of our Blaenau Gwent coverage, including postcode districts NP23. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Ebbw Vale?

Where the work needs approval it goes to Blaenau Gwent County Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Ebbw Vale?

£12,150–£20,050 for a 100 m² commercial roof in single-ply with insulation, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Do you work on school roofs?

Yes, where the school or its managing body appoints its own contractor. If your procurement rules require a framework contractor, check that before asking us to quote.

Do you need a hot works permit?

Only if torch-on felt or other naked-flame work is used, in which case the team works under your permit system with a fire watch afterwards. Where hot works are not allowed, we specify a flame-free system such as a cold-applied membrane.

Other flat roof work in Ebbw Vale

Commercial flat roofing in Ebbw Vale: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price