- Guide price
- £13,650–£22,450
- Survey
- Free for new and replacement roofs
- Quote
- Fixed, in writing
- Coverage
- England, Wales, Scotland, NI
Gloucestershire at a glance
- Largest towns
- Gloucester, Cheltenham, Stroud, Kingswood
- Postcode areas
- BS, GL
- Building control
- Gloucester City Council, Cheltenham Borough Council, Stroud District Council and 3 other councils
- Neighbouring areas
- Bristol · Wiltshire · Herefordshire · Somerset
- Guide price region
- South West (+3% on West Midlands rates)
How much does a commercial flat roof cost in Gloucestershire?
Guide prices including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £13,650–£22,450 |
| Condition survey and leak investigation | £150–£310 |
| Block of flats (150 m²), felt + insulation + scaffold | £16,000–£28,000 |
Which flat roofs are common in Gloucestershire?
Flat roofs in Gloucestershire sit on low-rise post-war blocks of flats, shops with flat-roofed rear stores below flats and 1960s and 1970s link-detached houses with flat-roofed garages and porches. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage. Approximate 1991–2020 regional averages based on Met Office data.
Building regulations in England
Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Gloucestershire the application goes to Gloucester City Council, Cheltenham Borough Council, Stroud District Council and 3 other councils. More on the rules.
Can you work around our trading hours and site rules?
Yes. Most commercial roofs can be replaced while the building stays open, and we agree the programme with you before any work starts.
That normally means set working hours, delivery and skip positions that keep entrances and fire exits clear, and phasing the roof so each section is watertight before the team leaves site. Noisy tasks such as strip-out can be timed for quieter periods, and early starts or weekend working can be arranged where your site allows. We tell you in advance which areas below the roof may be affected, so stock and equipment can be protected or moved.
Where torch-on felt is specified, the team works under your hot works permit system, with a fire watch after the torch is put away. If your site does not allow naked flames, we specify a cold-applied, self-adhesive or other flame-free system instead. Tenants, alarm companies and mechanical contractors are coordinated through one named contact.
How do you handle CDM, roof access and fragile surfaces?
Every job is planned under the Construction (Design and Management) Regulations 2015, or CDM (NI) 2016 in Northern Ireland, with a construction phase plan and a method statement for the roof.
As a commercial client you have duties under CDM too, including passing on information about the building, such as drawings, details of previous roof work and the asbestos register. Buildings put up before 2000 can contain asbestos, so we ask for the register or a refurbishment survey before pricing a strip-out. If asbestos is found, a licensed specialist surveys and removes it before we start.
Roofs and rooflights are treated as fragile until a competent person confirms otherwise. Edge protection goes up on every job, rooflights and fragile sheets are covered or fenced off, and we agree safe access before work starts: scaffold, a tower, a powered access platform or a fixed access point where one is suitable.
Which towns in Gloucestershire do we cover?
Commercial flat roofing in Gloucestershire: questions
Which towns in Gloucestershire do you cover?
All of Gloucestershire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a commercial flat roof cost in Gloucestershire?
£13,650–£22,450 for a 100 m² commercial roof in single-ply with insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Which postcode areas do you cover in Gloucestershire?
All of Gloucestershire, including the BS, GL postcode areas. Send your full postcode and we'll confirm.
Can the cost be spread over more than one budget year?
Yes. We can price a phased programme with each section shown separately, starting with the most urgent areas, so you can plan the spend while the building stays protected.
Can our existing roof be overlaid instead of stripped?
Often, if the survey shows the existing covering is sound, dry and firmly bonded. Wet insulation, a soft deck or several old layers mean a strip-out is the better long-term answer.
Can you re-roof while our premises stay open?
Usually, yes. We phase the work so each section is watertight before the team leaves site, keep entrances and fire exits clear, and agree working hours and deliveries with you first.
Everything about commercial flat roofing → · All flat roofing in Gloucestershire →