Flat RoofingContractors

Commercial and blocks

Commercial flat roofing across Kent

Across Kent, our vetted roofing teams working under S&K handle planned re-roofing and reactive leak repairs on commercial flat roofs. Each job is planned under CDM, with edge protection, controls on fragile surfaces and an agreed access route. Torch-on work follows your hot works permit system, or we specify a flame-free system where naked flames are not allowed.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image
Guide price
£14,550–£23,950
Survey
Free for new and replacement roofs
Quote
Fixed, in writing
Coverage
England, Wales, Scotland, NI

Kent at a glance

Largest towns
Maidstone, Gillingham, Royal Tunbridge Wells, Folkestone
Postcode areas
BR, CT, DA, ME, TN
Building control
Maidstone Borough Council, Medway Council, Tunbridge Wells Borough Council and 10 other councils
Neighbouring areas
Essex · London · East Sussex · Surrey
Guide price region
South East (+10% on West Midlands rates)

How much does a commercial flat roof cost in Kent?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£14,550–£23,950
Condition survey and leak investigation£170–£330
Block of flats (150 m²), felt + insulation + scaffold£17,100–£29,900

Which flat roofs are common in Kent?

Flat roofs in Kent sit on shops with flat-roofed rear stores below flats, 1960s and 1970s link-detached houses with flat-roofed garages and porches and low-rise post-war blocks of flats. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Kent the application goes to Maidstone Borough Council, Medway Council, Tunbridge Wells Borough Council and 10 other councils. More on the rules.

Do you offer condition surveys and phased budgets?

Yes. A condition survey with a written report is a paid service, guide £170–£330 for a typical single roof, with larger or multi-roof sites priced before we attend. A survey and quote for replacement work is free.

The report covers the covering, upstands, outlets, edges and rooflights, signs of ponding or wet insulation, and what needs doing now, soon and later. You can then plan a phased programme: urgent repairs first, then re-roofing in sections over one or more budget years, with each phase priced separately in your written quote.

Re-covering more than half of a roof over heated space usually triggers the thermal element rules, so the insulation is upgraded towards the renovation U-value where feasible; in England the non-domestic target is 0.18 W/m²K. We handle building control where it is needed. See building regulations and flat roof surveys.

Can you work around our trading hours and site rules?

Yes. Most commercial roofs can be replaced while the building stays open, and we agree the programme with you before any work starts.

That normally means set working hours, delivery and skip positions that keep entrances and fire exits clear, and phasing the roof so each section is watertight before the team leaves site. Noisy tasks such as strip-out can be timed for quieter periods, and early starts or weekend working can be arranged where your site allows. We tell you in advance which areas below the roof may be affected, so stock and equipment can be protected or moved.

Where torch-on felt is specified, the team works under your hot works permit system, with a fire watch after the torch is put away. If your site does not allow naked flames, we specify a cold-applied, self-adhesive or other flame-free system instead. Tenants, alarm companies and mechanical contractors are coordinated through one named contact.

Which towns in Kent do we cover?

Commercial flat roofing in Kent: questions

Which towns in Kent do you cover?

All of Kent. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a commercial flat roof cost in Kent?

£14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which postcode areas do you cover in Kent?

All of Kent, including the BR, CT, DA, ME, TN postcode areas. Send your full postcode and we'll confirm.

Can the cost be spread over more than one budget year?

Yes. We can price a phased programme with each section shown separately, starting with the most urgent areas, so you can plan the spend while the building stays protected.

Can our existing roof be overlaid instead of stripped?

Often, if the survey shows the existing covering is sound, dry and firmly bonded. Wet insulation, a soft deck or several old layers mean a strip-out is the better long-term answer.

Do you work on school roofs?

Yes, where the school or its managing body appoints its own contractor. If your procurement rules require a framework contractor, check that before asking us to quote.

Everything about commercial flat roofing → · All flat roofing in Kent →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price