- Guide price
- £12,550–£20,700
- Survey
- Free for new and replacement roofs
- Quote
- Fixed, in writing
- Coverage
- England, Wales, Scotland, NI
Lancashire at a glance
- Largest towns
- Preston, Burnley, Blackburn, Blackpool
- Postcode areas
- BB, FY, L, LA, OL, PR, WN
- Building control
- Preston City Council, Burnley Borough Council, Blackburn with Darwen Borough Council and 10 other councils
- Neighbouring areas
- Greater Manchester · Merseyside · Cheshire · West Yorkshire
- Guide price region
- North West (−5% on West Midlands rates)
How much does a commercial flat roof cost in Lancashire?
Guide prices including VAT at North West rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £12,550–£20,700 |
| Condition survey and leak investigation | £140–£290 |
| Block of flats (150 m²), felt + insulation + scaffold | £14,750–£25,850 |
Which flat roofs are common in Lancashire?
Flat roofs in Lancashire sit on terraced streets with flat-roofed rear kitchens and bathrooms, low-rise post-war blocks of flats and 1930s semis with flat-roofed garages and kitchen extensions. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour. Approximate 1991–2020 regional averages based on Met Office data.
Building regulations in England
Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Lancashire the application goes to Preston City Council, Burnley Borough Council, Blackburn with Darwen Borough Council and 10 other councils. More on the rules.
Can you work around our trading hours and site rules?
Yes. Most commercial roofs can be replaced while the building stays open, and we agree the programme with you before any work starts.
That normally means set working hours, delivery and skip positions that keep entrances and fire exits clear, and phasing the roof so each section is watertight before the team leaves site. Noisy tasks such as strip-out can be timed for quieter periods, and early starts or weekend working can be arranged where your site allows. We tell you in advance which areas below the roof may be affected, so stock and equipment can be protected or moved.
Where torch-on felt is specified, the team works under your hot works permit system, with a fire watch after the torch is put away. If your site does not allow naked flames, we specify a cold-applied, self-adhesive or other flame-free system instead. Tenants, alarm companies and mechanical contractors are coordinated through one named contact.
Which roofing system suits a commercial flat roof?
Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.
- Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
- Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
- Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.
Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).
Which towns in Lancashire do we cover?
- Preston
- Burnley
- Blackburn
- Blackpool
- Morecambe
- Lancaster
- Lytham St Annes
- Skelmersdale
- Leyland
- Accrington
- Chorley
- Darwen
- Thornton-Cleveleys
- Nelson
- Fleetwood
- Ormskirk
- Rawtenstall
- Colne
- Poulton-le-Fylde
- Heysham
- Haslingden
Commercial flat roofing in Lancashire: questions
Which towns in Lancashire do you cover?
All of Lancashire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a commercial flat roof cost in Lancashire?
£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at North West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Which council handles building control for a flat roof in Lancashire?
It depends on where the roof is: in Lancashire that's Preston City Council, Burnley Borough Council, Blackburn with Darwen Borough Council and 10 other councils. Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. We confirm which applies at the survey.
Do you need a hot works permit?
Only if torch-on felt or other naked-flame work is used, in which case the team works under your permit system with a fire watch afterwards. Where hot works are not allowed, we specify a flame-free system such as a cold-applied membrane.
Can the cost be spread over more than one budget year?
Yes. We can price a phased programme with each section shown separately, starting with the most urgent areas, so you can plan the spend while the building stays protected.
Do you work on school roofs?
Yes, where the school or its managing body appoints its own contractor. If your procurement rules require a framework contractor, check that before asking us to quote.
Everything about commercial flat roofing → · All flat roofing in Lancashire →