Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Melton Mowbray

For facilities managers and business owners in Melton Mowbray, we handle planned re-roofing and reactive leak repairs on flat roofs. Expect a clear method statement, edge protection on every job, and a written quote that shows each phase separately if you want to spread the cost over more than one budget year.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Melton Mowbray at a glance

Postcode districts
LE13, LE14
Population
about 27,737 (GeoNames)
Council area
Melton Borough Council
Building approval
Melton Borough Council building control, or a registered building control approver
Nearest main town
Leicester, about 14 miles
Guide price region
East Midlands (−2% on West Midlands rates)

What do commercial flat roofs in Melton Mowbray need?

Safety planning matters on commercial sites in Melton Mowbray. Every job is planned under CDM, with a method statement, edge protection and covers over rooflights and fragile areas. If asbestos is found, a licensed specialist surveys and removes it before our work starts, so nobody is put at risk.

Around Melton Mowbray, flat roofs are common on bungalows with flat-roofed side extensions and dormers and on newer estates where the first extension roofs are now being replaced. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.

How much does a commercial flat roof cost in Melton Mowbray?

For Melton Mowbray we use East Midlands rates: £12,950–£21,350 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,950–£21,350
Condition survey and leak investigation£150–£290
Block of flats (150 m²), felt + insulation + scaffold£15,250–£26,650

How do you handle CDM, roof access and fragile surfaces?

Every job is planned under the Construction (Design and Management) Regulations 2015, or CDM (NI) 2016 in Northern Ireland, with a construction phase plan and a method statement for the roof.

As a commercial client you have duties under CDM too, including passing on information about the building, such as drawings, details of previous roof work and the asbestos register. Buildings put up before 2000 can contain asbestos, so we ask for the register or a refurbishment survey before pricing a strip-out. If asbestos is found, a licensed specialist surveys and removes it before we start.

Roofs and rooflights are treated as fragile until a competent person confirms otherwise. Edge protection goes up on every job, rooflights and fragile sheets are covered or fenced off, and we agree safe access before work starts: scaffold, a tower, a powered access platform or a fixed access point where one is suitable.

What's included?

  • Written workmanship guarantee, with manufacturer guarantees registered where the system allows
  • Single-ply, built-up felt, liquid-applied and mastic asphalt systems
  • CDM planning, edge protection and fragile-surface controls on every job
  • Warm-roof insulation upgrades and building control where needed

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Melton Mowbray: questions

Do you cover Melton Mowbray?

Yes. Melton Mowbray is part of our Leicestershire coverage, including postcode districts LE13, LE14. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Melton Mowbray?

Where the work needs approval it goes to Melton Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Melton Mowbray?

£12,950–£21,350 for a 100 m² commercial roof in single-ply with insulation, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can our existing roof be overlaid instead of stripped?

Often, if the survey shows the existing covering is sound, dry and firmly bonded. Wet insulation, a soft deck or several old layers mean a strip-out is the better long-term answer.

Do you need a hot works permit?

Only if torch-on felt or other naked-flame work is used, in which case the team works under your permit system with a fire watch afterwards. Where hot works are not allowed, we specify a flame-free system such as a cold-applied membrane.

Other flat roof work in Melton Mowbray

Commercial flat roofing in Melton Mowbray: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price