Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Camden

For facilities managers and business owners in Camden, we handle planned re-roofing and reactive leak repairs on flat roofs. Expect a clear method statement, edge protection on every job, and a written quote that shows each phase separately if you want to spread the cost over more than one budget year.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Camden at a glance

Postcode districts
NW1, W1W, W1T, WC1E, WC1H, N1C, WC1B, WC1 and 11 more
Council area
London Borough of Camden
Building approval
London Borough of Camden building control, or a registered building control approver
Guide price region
London (+20% on West Midlands rates)

What do commercial flat roofs in Camden need?

Businesses in Camden need a roofing contractor who arrives with a plan, not just a price. We put the system, build-up, phasing, access and payment terms in a fixed written quote, and keep each section of the roof watertight before the team leaves site, so trading is not put at risk.

Camden's flat roofs are mostly on Victorian and Edwardian terraces with flat-roofed back additions, with plenty on mansion blocks and purpose-built flats with large flat roofs too. The Thames basin is one of the drier parts of Britain at roughly 730 mm of rain a year, but summer heat is the bigger test here: dark membranes on south-facing roofs swing a long way in temperature.

How much does a commercial flat roof cost in Camden?

At London guide rates, a 100 m² commercial roof in single-ply with insulation comes to £15,900–£26,150 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£15,900–£26,150
Condition survey and leak investigation£180–£360
Block of flats (150 m²), felt + insulation + scaffold£18,650–£32,650

Which roofing system suits a commercial flat roof?

Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.

  • Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
  • Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
  • Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.

Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).

What's included?

  • Warm-roof insulation upgrades and building control where needed
  • Programme planned around trading hours, deliveries and site rules
  • CDM planning, edge protection and fragile-surface controls on every job
  • Free survey and fixed written quote for replacement and new roofs

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Camden: questions

Do you cover Camden?

Yes. Camden is part of our London coverage, including postcode districts NW1, W1W, W1T, WC1E, WC1H, N1C and 13 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Camden?

Where the work needs approval it goes to London Borough of Camden building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Camden?

£15,900–£26,150 for a 100 m² commercial roof in single-ply with insulation, at London guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Do you need a hot works permit?

Only if torch-on felt or other naked-flame work is used, in which case the team works under your permit system with a fire watch afterwards. Where hot works are not allowed, we specify a flame-free system such as a cold-applied membrane.

Can you re-roof while our premises stay open?

Usually, yes. We phase the work so each section is watertight before the team leaves site, keep entrances and fire exits clear, and agree working hours and deliveries with you first.

Other flat roof work in Camden

Commercial flat roofing in Camden: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price