Wellington at a glance
- Postcode districts
- TF1, TF5
- Population
- about 22,816 (GeoNames)
- Council area
- Telford & Wrekin Council
- Building approval
- Telford & Wrekin Council building control, or a registered building control approver
- Nearest main town
- Telford, about 3 miles
- Guide price region
- West Midlands (baseline rates)
What do commercial flat roofs in Wellington need?
We are flat roof specialists, so a commercial roof in Wellington gets a system chosen for the job: single-ply for large, simple areas, built-up felt where there is foot traffic and plant, or a liquid overlay where the existing roof is sound. The survey explains the trade-offs in plain terms.
Wellington's flat roofs are mostly on newer estates where the first extension roofs are now being replaced, with plenty on terraced streets with flat-roofed rear kitchens and bathrooms too. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.
How much does a commercial flat roof cost in Wellington?
For Wellington we use West Midlands rates: £13,250–£21,800 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £13,250–£21,800 |
| Condition survey and leak investigation | £150–£300 |
| Block of flats (150 m²), felt + insulation + scaffold | £15,550–£27,200 |
Which roofing system suits a commercial flat roof?
Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.
- Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
- Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
- Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.
Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).
What's included?
- Free survey and fixed written quote for replacement and new roofs
- Single-ply, built-up felt, liquid-applied and mastic asphalt systems
- CDM planning, edge protection and fragile-surface controls on every job
- Warm-roof insulation upgrades and building control where needed
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Telford · 3 mi
- Shrewsbury · 10 mi
- Stafford · 18 mi
- Wolverhampton · 18 mi
- Kingswinford · 20 mi
- Cannock · 20 mi
Commercial flat roofing in Wellington: questions
Do you cover Wellington?
Yes. Wellington is part of our Shropshire coverage, including postcode districts TF1, TF5. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Wellington?
Where the work needs approval it goes to Telford & Wrekin Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a commercial flat roof cost in Wellington?
£13,250–£21,800 for a 100 m² commercial roof in single-ply with insulation, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can the cost be spread over more than one budget year?
Yes. We can price a phased programme with each section shown separately, starting with the most urgent areas, so you can plan the spend while the building stays protected.
What happens to air conditioning units and other roof plant?
Plant can often stay in place, with the new roof detailed around its supports. Where it has to be isolated and lifted, your mechanical contractor does that while we re-roof beneath it, and we agree the timing at survey stage.