Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Reigate

We quote for commercial flat roofing in Reigate on shops, offices, surgeries, clubs and light industrial units. The work is carried out by vetted roofing teams under S&K, with building control handled where the roof needs an insulation upgrade and a written workmanship guarantee on every re-roof.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Reigate at a glance

Postcode districts
RH2
Population
about 21,820 (GeoNames)
Council area
Reigate and Banstead Borough Council
Building approval
Reigate and Banstead Borough Council building control, or a registered building control approver
Nearest main town
Crawley, about 9 miles
Guide price region
South East (+10% on West Midlands rates)

What do commercial flat roofs in Reigate need?

Owners and agents in Reigate can plan spending with a phased programme: urgent repairs now, then re-roofing section by section over one or more budget years. Each phase is priced separately in writing, and the survey and quote for replacement work are free, with no obligation to go ahead.

In and around Reigate, flat roofs are typically found on lock-up garage blocks on estates, and on shops with flat-roofed rear stores below flats. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.

How much does a commercial flat roof cost in Reigate?

At South East guide rates, a 100 m² commercial roof in single-ply with insulation comes to £14,550–£23,950 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£14,550–£23,950
Condition survey and leak investigation£170–£330
Block of flats (150 m²), felt + insulation + scaffold£17,100–£29,900

How do you handle CDM, roof access and fragile surfaces?

Every job is planned under the Construction (Design and Management) Regulations 2015, or CDM (NI) 2016 in Northern Ireland, with a construction phase plan and a method statement for the roof.

As a commercial client you have duties under CDM too, including passing on information about the building, such as drawings, details of previous roof work and the asbestos register. Buildings put up before 2000 can contain asbestos, so we ask for the register or a refurbishment survey before pricing a strip-out. If asbestos is found, a licensed specialist surveys and removes it before we start.

Roofs and rooflights are treated as fragile until a competent person confirms otherwise. Edge protection goes up on every job, rooflights and fragile sheets are covered or fenced off, and we agree safe access before work starts: scaffold, a tower, a powered access platform or a fixed access point where one is suitable.

What's included?

  • Free survey and fixed written quote for replacement and new roofs
  • Programme planned around trading hours, deliveries and site rules
  • CDM planning, edge protection and fragile-surface controls on every job
  • Warm-roof insulation upgrades and building control where needed

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Reigate: questions

Do you cover Reigate?

Yes. Reigate is part of our Surrey coverage, including postcode districts RH2. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Reigate?

Where the work needs approval it goes to Reigate and Banstead Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Reigate?

£14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can you re-roof while our premises stay open?

Usually, yes. We phase the work so each section is watertight before the team leaves site, keep entrances and fire exits clear, and agree working hours and deliveries with you first.

What happens to air conditioning units and other roof plant?

Plant can often stay in place, with the new roof detailed around its supports. Where it has to be isolated and lifted, your mechanical contractor does that while we re-roof beneath it, and we agree the timing at survey stage.

Other flat roof work in Reigate

Commercial flat roofing in Reigate: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price