Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Birmingham

If the roof over your premises in Birmingham is ponding, splitting or letting water in, we can survey it free when you are considering replacement, or provide a paid condition report if you need evidence to plan budgets. Single-ply, built-up felt and liquid-applied systems are all available, matched to the building.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Birmingham at a glance

Postcode districts
B1, B2, B3, B4, B5, B6, B7, B8 and 31 more
Population
about 1,157,603 (GeoNames)
Council area
Birmingham City Council
Building approval
Birmingham City Council building control, or a registered building control approver
Guide price region
West Midlands (baseline rates)

What do commercial flat roofs in Birmingham need?

Owners and agents in Birmingham can plan spending with a phased programme: urgent repairs now, then re-roofing section by section over one or more budget years. Each phase is priced separately in writing, and the survey and quote for replacement work are free, with no obligation to go ahead.

Birmingham's flat roofs are mostly on 1930s semis with flat-roofed garages and kitchen extensions, with plenty on shops with flat-roofed rear stores below flats too. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.

How much does a commercial flat roof cost in Birmingham?

At West Midlands guide rates, a 100 m² commercial roof in single-ply with insulation comes to £13,250–£21,800 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£13,250–£21,800
Condition survey and leak investigation£150–£300
Block of flats (150 m²), felt + insulation + scaffold£15,550–£27,200

Which roofing system suits a commercial flat roof?

Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.

  • Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
  • Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
  • Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.

Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).

What's included?

  • Warm-roof insulation upgrades and building control where needed
  • CDM planning, edge protection and fragile-surface controls on every job
  • Programme planned around trading hours, deliveries and site rules
  • Single-ply, built-up felt, liquid-applied and mastic asphalt systems

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Birmingham: questions

Do you cover Birmingham?

Yes. Birmingham is part of our West Midlands coverage, including postcode districts B1, B2, B3, B4, B5, B6 and 33 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Birmingham?

Where the work needs approval it goes to Birmingham City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Birmingham?

£13,250–£21,800 for a 100 m² commercial roof in single-ply with insulation, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Who deals with building control on a commercial re-roof?

We do, where the work needs approval. Replacing more than half of a roof over heated space usually means upgrading the insulation towards the renovation U-value where feasible, which is 0.18 W/m²K for non-domestic buildings in England.

Can you re-roof while our premises stay open?

Usually, yes. We phase the work so each section is watertight before the team leaves site, keep entrances and fire exits clear, and agree working hours and deliveries with you first.

Other flat roof work in Birmingham

Commercial flat roofing in Birmingham: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price