Flat RoofingContractors

Roofs we replace and build

Dormer roofs in Armagh

A dormer roof in Armagh may be only a few square metres, but it sits high up and meets a tiled roof on several sides. That makes the edges the hard part. Our quotes for dormer roofs set out the access, the insulation, the membrane and every abutment, with building control handled where needed.

Rear box dormer with a grey GRP flat roof and anthracite cladding on a Victorian terraceComputer-generated example image

Armagh at a glance

Postcode districts
BT60, BT61
Population
about 14,801 (GeoNames)
Council area
Armagh City, Banbridge and Craigavon Borough Council
Building approval
Armagh City, Banbridge and Craigavon Borough Council building control
Nearest main town
Craigavon, about 13 miles
Guide price region
Northern Ireland (−12% on West Midlands rates)

What does a dormer roof in Armagh need?

A dormer roof that has been patched several times in Armagh often has layers of old repairs that hide the real fault. Stripping back to the deck shows what has been going on, and lets the team rebuild the back-edge abutment properly rather than sealing over it again.

Around Armagh, flat roofs are common on low-rise post-war blocks of flats and on lock-up garage blocks on estates. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.

How much does a new dormer roof cost in Armagh?

For Armagh we use Northern Ireland rates: £1,250–£2,350 is the guide for an 8 m² GRP dormer roof including scaffold, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Dormer (8 m²), GRP, scaffold£1,250–£2,350
Single garage (18 m²), EPDM rubber£1,400–£2,450
Extension (20 m²), GRP, new deck + insulation£2,650–£4,750

Is GRP or EPDM better on a dormer roof?

GRP fibreglass is often the first choice on a dormer, because it is laid as a liquid resin over a mat and forms neat, rigid edges, corners and drip details on a small roof. It cures to a hard surface that copes with occasional foot traffic during window cleaning or maintenance.

EPDM rubber works well on a plain rectangular dormer and can usually be laid as one sheet, with no field joins. Unlike GRP, it does not depend on resin curing conditions on the day. Torch-on felt can be used, but working a torch close to timber cladding, fascias and tiles needs extra care, so a cold-applied system is often chosen instead.

We recommend the system after surveying the dormer, its edges and how it meets the main roof.

What's included?

  • Scaffold with edge protection, priced in the quote
  • Written workmanship guarantee, with building control handled where needed
  • Warm-roof insulation and a vapour control layer
  • New membrane, drip trims and back-edge abutment under the tiles

Building control in Northern Ireland

In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.

Which nearby areas do we also cover?

Dormer roofs in Armagh: questions

Do you cover Armagh?

Yes. Armagh is part of our County Armagh coverage, including postcode districts BT60, BT61. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Armagh?

Where the work needs approval it goes to Armagh City, Banbridge and Craigavon Borough Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a new dormer roof cost in Armagh?

£1,250–£2,350 for an 8 m² GRP dormer roof including scaffold, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can a dormer roof be replaced without scaffold?

Rarely. A tower or full scaffold is usually needed to give a safe working platform and edge protection at that height.

Why does my dormer leak at the back where it meets the roof?

That junction is the most common leak point, usually because the upstand or flashing under the tiles has failed. A proper re-roof rebuilds it.

Other flat roof work in Armagh

Dormer roofs in Armagh: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price