Dormer roofs across Hertfordshire

Guide price

£1,450–£2,800

Survey

Free for new and replacement roofs

Quote

Fixed, in writing

Coverage

England, Wales, Scotland, NI

How much does a new dormer roof cost in Hertfordshire?

Guide prices including VAT at East of England rates. The fixed price comes after a free survey for new and replacement roofs.

Which flat roofs are common in Hertfordshire?

Flat roofs in Hertfordshire sit on bungalows with flat-roofed side extensions and dormers, lock-up garage blocks on estates and 1960s and 1970s link-detached houses with flat-roofed garages and porches. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Hertfordshire the application goes to Watford Borough Council, Dacorum Borough Council, Stevenage Borough Council and 7 other councils. More on the rules.

Is GRP or EPDM better on a dormer roof?

GRP fibreglass is often the first choice on a dormer, because it is laid as a liquid resin over a mat and forms neat, rigid edges, corners and drip details on a small roof. It cures to a hard surface that copes with occasional foot traffic during window cleaning or maintenance.

EPDM rubber works well on a plain rectangular dormer and can usually be laid as one sheet, with no field joins. Unlike GRP, it does not depend on resin curing conditions on the day. Torch-on felt can be used, but working a torch close to timber cladding, fascias and tiles needs extra care, so a cold-applied system is often chosen instead.

We recommend the system after surveying the dormer, its edges and how it meets the main roof.

Why is scaffold and tile detailing so important on a dormer?

Because a dormer roof is high, small and surrounded by a pitched tiled roof, most failures happen at the edges rather than in the middle. Safe access is what allows those edges to be done properly.

Ladders alone do not give a safe working platform at that height, and every roof is treated as fragile until a competent person confirms otherwise. Scaffold with edge protection lets the team work along the front and sides of the dormer, and reach the junction with the main roof.

The back of the dormer is where most leaks start. The new membrane has to turn up under the tiles or slates, with a flashing that sheds water over it. Where the old detail used lead, we reinstate or replace it. Small roofs also leave little room for error at the drip edge: the front trim must throw water clear of the window frame and fascia, and any gutter has to be big enough for the area it drains. Dormer cheeks with tile hanging or cladding are checked for gaps that let water behind.

If you are also planning insulation upgrades or work on the main roof, tell us at survey so the scaffold can be shared.

Which towns in Hertfordshire do we cover?

• Watford
• Hemel Hempstead
• Stevenage
• St Albans
• Welwyn Garden City
• Cheshunt
• Hatfield
• Bishop's Stortford
• Borehamwood
• Hitchin
• Hoddesdon
• Letchworth Garden City
• Harpenden
• Bushey
• Hertford
• Rickmansworth
• Potters Bar
• Berkhamsted
• Ware
• Royston

Everything about dormer roofs → · All flat roofing in Hertfordshire →