Barnet at a glance
- Postcode districts
- N20, N11, N14, N12, EN4, N3, EN5, NW7 and 1 more
- Council area
- London Borough of Barnet
- Building approval
- London Borough of Barnet building control, or a registered building control approver
- Guide price region
- London (+20% on West Midlands rates)
What does a dormer roof in Barnet need?
A dormer roof that has been patched several times in Barnet often has layers of old repairs that hide the real fault. Stripping back to the deck shows what has been going on, and lets the team rebuild the back-edge abutment properly rather than sealing over it again.
In and around Barnet, flat roofs are typically found on shops with flat-roofed stores below flats above, and on mansard and dormer loft conversions. The Thames basin is one of the drier parts of Britain at roughly 730 mm of rain a year, but summer heat is the bigger test here: dark membranes on south-facing roofs swing a long way in temperature.
How much does a new dormer roof cost in Barnet?
Guide price in Barnet: £1,700–£3,200 for an 8 m² GRP dormer roof including scaffold, including VAT at London rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Dormer (8 m²), GRP, scaffold | £1,700–£3,200 |
| Single garage (18 m²), EPDM rubber | £1,900–£3,350 |
| Extension (20 m²), GRP, new deck + insulation | £3,600–£6,450 |
Is GRP or EPDM better on a dormer roof?
GRP fibreglass is often the first choice on a dormer, because it is laid as a liquid resin over a mat and forms neat, rigid edges, corners and drip details on a small roof. It cures to a hard surface that copes with occasional foot traffic during window cleaning or maintenance.
EPDM rubber works well on a plain rectangular dormer and can usually be laid as one sheet, with no field joins. Unlike GRP, it does not depend on resin curing conditions on the day. Torch-on felt can be used, but working a torch close to timber cladding, fascias and tiles needs extra care, so a cold-applied system is often chosen instead.
We recommend the system after surveying the dormer, its edges and how it meets the main roof.
What's included?
- Free survey of the dormer roof, cheeks and main roof junction
- Strip-out of the old covering and deck repairs
- Warm-roof insulation and a vapour control layer
- New membrane, drip trims and back-edge abutment under the tiles
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Dormer roofs in Barnet: questions
Do you cover Barnet?
Yes. Barnet is part of our London coverage, including postcode districts N20, N11, N14, N12, EN4, N3 and 3 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Barnet?
Where the work needs approval it goes to London Borough of Barnet building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a new dormer roof cost in Barnet?
£1,700–£3,200 for an 8 m² GRP dormer roof including scaffold, at London guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Why does my dormer leak at the back where it meets the roof?
That junction is the most common leak point, usually because the upstand or flashing under the tiles has failed. A proper re-roof rebuilds it.
Can a dormer roof be replaced without scaffold?
Rarely. A tower or full scaffold is usually needed to give a safe working platform and edge protection at that height.