Melksham at a glance
- Postcode districts
- SN12
- Population
- about 19,357 (GeoNames)
- Council area
- Wiltshire Council
- Building approval
- Wiltshire Council building control, or a registered building control approver
- Nearest main town
- Bath, about 10 miles
- Guide price region
- South West (+3% on West Midlands rates)
What does a dormer roof in Melksham need?
Buyers' surveys in Melksham often flag dormer roofs, because they are hard to see from the ground and easy to neglect. A recent replacement, with building control sign-off where needed and written guarantees, answers that question before it becomes a problem in the sale.
Melksham's flat roofs are mostly on 1960s and 1970s link-detached houses with flat-roofed garages and porches, with plenty on 1930s semis with flat-roofed garages and kitchen extensions too. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a new dormer roof cost in Melksham?
At South West guide rates, an 8 m² GRP dormer roof including scaffold comes to £1,450–£2,750 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Dormer (8 m²), GRP, scaffold | £1,450–£2,750 |
| Single garage (18 m²), EPDM rubber | £1,650–£2,900 |
| Extension (20 m²), GRP, new deck + insulation | £3,100–£5,550 |
Is GRP or EPDM better on a dormer roof?
GRP fibreglass is often the first choice on a dormer, because it is laid as a liquid resin over a mat and forms neat, rigid edges, corners and drip details on a small roof. It cures to a hard surface that copes with occasional foot traffic during window cleaning or maintenance.
EPDM rubber works well on a plain rectangular dormer and can usually be laid as one sheet, with no field joins. Unlike GRP, it does not depend on resin curing conditions on the day. Torch-on felt can be used, but working a torch close to timber cladding, fascias and tiles needs extra care, so a cold-applied system is often chosen instead.
We recommend the system after surveying the dormer, its edges and how it meets the main roof.
What's included?
- Free survey of the dormer roof, cheeks and main roof junction
- Written workmanship guarantee, with building control handled where needed
- Warm-roof insulation and a vapour control layer
- Scaffold with edge protection, priced in the quote
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Dormer roofs in Melksham: questions
Do you cover Melksham?
Yes. Melksham is part of our Wiltshire coverage, including postcode districts SN12. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Melksham?
Where the work needs approval it goes to Wiltshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a new dormer roof cost in Melksham?
£1,450–£2,750 for an 8 m² GRP dormer roof including scaffold, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can you replace the lead on my dormer at the same time?
Yes, where lead forms part of the dormer abutment or cheek flashings, we include renewing it in the roof job.
Can a dormer roof be replaced without scaffold?
Rarely. A tower or full scaffold is usually needed to give a safe working platform and edge protection at that height.