Flat RoofingContractors

Flat roof systems

EPDM rubber roofing across Berkshire

For EPDM rubber roofs in Berkshire, expect the same careful process wherever the property is: survey, fixed written quote, strip and install, then a final walk-round. Rainfall and wind exposure vary from site to site, so trims, fixings and adhesives are chosen for the roof in front of us rather than taken from a standard list.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image
Price per m²
£72–£127
Typical life
25–50 years
Manufacturer guarantees
20-year material warranties are common
Typical garage roof
£1,750–£3,100

Berkshire at a glance

Largest towns
Reading, Slough, Bracknell, Maidenhead
Postcode areas
GU, RG, SL
Building control
Reading Borough Council, Slough Borough Council, Bracknell Forest Council and 3 other councils
Neighbouring areas
Surrey · Buckinghamshire · Hampshire · Oxfordshire
Guide price region
South East (+10% on West Midlands rates)

How much does an EPDM rubber roof cost in Berkshire?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,750–£3,100
Extension (20 m²), EPDM, new deck + insulation£3,100–£5,350
Porch or bay (4 m²), EPDM£850–£1,400

Which flat roofs are common in Berkshire?

Flat roofs in Berkshire sit on 1930s semis with flat-roofed garages and kitchen extensions, lock-up garage blocks on estates and terraced streets with flat-roofed rear kitchens and bathrooms. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Berkshire the application goes to Reading Borough Council, Slough Borough Council, Bracknell Forest Council and 3 other councils. More on the rules.

Do I need building regulations approval to replace a roof with EPDM?

Often, yes. In England, Wales and Northern Ireland, re-covering more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof should be insulated towards the renovation standard where that is feasible; in Scotland, the council's building standards service decides whether a building warrant is needed.

An unheated detached garage normally falls outside these rules, and a patch repair is treated differently from a full re-cover.

In practice that means a warm roof: insulation above the deck, a vapour control layer beneath it and the EPDM on top. The extra thickness lifts the finished roof, so at survey we check door thresholds, window cills, wall flashings and upstand heights, aiming for an upstand of about 150 mm above the finished surface. Where approval is needed, we deal with building control or building standards for you. The building regulations page and our warm vs cold roof guide go into more detail.

How long does an EPDM roof last, and what guarantees come with it?

A well-specified EPDM roof typically lasts 25 to 50 years, and one BBA assessment of an EPDM membrane puts its expected life at 35 years or more. Problems usually come from poorly bonded upstands, damaged trims or ponding, rather than the rubber itself.

Three separate documents can sit behind an EPDM roof:

  • Manufacturer material guarantee: covers the membrane and, on some systems, the wider build-up. Many need registration and a specified build-up, so we register it for you where the system allows.
  • Our written workmanship guarantee: given on every re-roof, with the length set out in your quote.
  • Insurance-backed guarantee: an option worth asking about if you want cover that does not depend on the contractor still trading.

A BBA certificate is an assessment of the product, not a guarantee. Our guide to flat roof guarantees explains the differences, and the lifespan guide compares EPDM with the other systems.

Which towns in Berkshire do we cover?

EPDM rubber roofing in Berkshire: questions

Which towns in Berkshire do you cover?

All of Berkshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does an EPDM rubber roof cost in Berkshire?

£1,750–£3,100 for a typical 18 m² garage roof in EPDM, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which postcode areas do you cover in Berkshire?

All of Berkshire, including the GU, RG, SL postcode areas. Send your full postcode and we'll confirm.

Can EPDM be laid over an old felt roof?

Sometimes, but we usually recommend stripping old felt first. Overlaying hides any rot or wet insulation underneath, and over a heated room a full replacement is often when insulation has to be added anyway.

Can a punctured EPDM roof be repaired?

Usually, yes. The area is cleaned and primed, then an EPDM patch or cover tape is bonded over the damage. If water has reached the deck, a survey first is sensible.

How long does it take to fit an EPDM roof?

A single garage typically takes one to two days and an insulated extension roof two to three, weather permitting. Larger roofs, scaffold and complex details add time.

Everything about EPDM rubber roofing → · All flat roofing in Berkshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price