Flat RoofingContractors

Flat roof systems

EPDM rubber roofing in Consett

Rubber roofing for Consett homes, landlords and small businesses: we strip, insulate where needed and re-cover flat roofs in EPDM, then finish the edges, outlets and wall upstands carefully. You deal with one contractor from survey to sign-off, and you get a written workmanship guarantee on every re-roof.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image

Consett at a glance

Postcode districts
DH8
Population
about 29,137 (GeoNames)
Council area
Durham County Council
Building approval
Durham County Council building control, or a registered building control approver
Nearest main town
Newcastle upon Tyne, about 12 miles
Guide price region
North East (−7% on West Midlands rates)

Why choose EPDM rubber roofing in Consett?

EPDM makes sense for a property in Consett when the roof is a straightforward shape, such as a garage or rear extension, and nobody needs to walk on it. A single sheet leaves few joins to fail, and because it is cold-applied there is no naked flame near timber fascias or a lived-in home.

In and around Consett, flat roofs are typically found on terraced streets with flat-roofed rear kitchens and bathrooms, and on low-rise post-war blocks of flats. England averages roughly 870 mm of rain a year; the North East is drier than the west but cold and windy near the coast, so wind uplift and freeze-thaw are in the specification.

How much does an EPDM rubber roof cost in Consett?

Guide price in Consett: £1,500–£2,600 for a typical 18 m² garage roof in EPDM, including VAT at North East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,500–£2,600
Extension (20 m²), EPDM, new deck + insulation£2,600–£4,550
Porch or bay (4 m²), EPDM£700–£1,150

How long does an EPDM roof last, and what guarantees come with it?

A well-specified EPDM roof typically lasts 25 to 50 years, and one BBA assessment of an EPDM membrane puts its expected life at 35 years or more. Problems usually come from poorly bonded upstands, damaged trims or ponding, rather than the rubber itself.

Three separate documents can sit behind an EPDM roof:

  • Manufacturer material guarantee: covers the membrane and, on some systems, the wider build-up. Many need registration and a specified build-up, so we register it for you where the system allows.
  • Our written workmanship guarantee: given on every re-roof, with the length set out in your quote.
  • Insurance-backed guarantee: an option worth asking about if you want cover that does not depend on the contractor still trading.

A BBA certificate is an assessment of the product, not a guarantee. Our guide to flat roof guarantees explains the differences, and the lifespan guide compares EPDM with the other systems.

What's included?

  • Strip-out of the old covering, with waste taken away
  • Deck check and replacement of soft or rotten boards
  • Warm-roof insulation and vapour control layer where required
  • EPDM membrane fully bonded, in one sheet where the roof size allows

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

EPDM rubber roofing in Consett: questions

Do you cover Consett?

Yes. Consett is part of our County Durham coverage, including postcode districts DH8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Consett?

Where the work needs approval it goes to Durham County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does an EPDM rubber roof cost in Consett?

£1,500–£2,600 for a typical 18 m² garage roof in EPDM, at North East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

How long does it take to fit an EPDM roof?

A single garage typically takes one to two days and an insulated extension roof two to three, weather permitting. Larger roofs, scaffold and complex details add time.

Can a punctured EPDM roof be repaired?

Usually, yes. The area is cleaned and primed, then an EPDM patch or cover tape is bonded over the damage. If water has reached the deck, a survey first is sensible.

Other flat roof work in Consett

EPDM rubber roofing in Consett: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price