Flat RoofingContractors

Flat roof systems

EPDM rubber roofing in Thetford

An EPDM roof in Thetford is priced by size, deck condition, insulation and access. Start with a guide figure from our online tool, then book a free survey. Once we have measured up, you get a fixed written quote with the build-up, the trims and the guarantee terms spelled out, and no obligation to go ahead.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image

Thetford at a glance

Postcode districts
IP24
Population
about 24,833 (GeoNames)
Council area
Breckland Council
Building approval
Breckland Council building control, or a registered building control approver
Guide price region
East of England (+5% on West Midlands rates)

Why choose EPDM rubber roofing in Thetford?

If your Thetford roof has been patched more than once and the felt is cracking or blistering, a full replacement in EPDM can be better value than another repair. The rubber stays flexible through hot summers and freezing nights, and the replacement is the right point to bring the insulation up to standard.

Around Thetford, flat roofs are common on bungalows with flat-roofed side extensions and dormers and on 1930s semis with flat-roofed garages and kitchen extensions. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.

How much does an EPDM rubber roof cost in Thetford?

Guide price in Thetford: £1,700–£2,950 for a typical 18 m² garage roof in EPDM, including VAT at East of England rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,700–£2,950
Extension (20 m²), EPDM, new deck + insulation£2,950–£5,150
Porch or bay (4 m²), EPDM£800–£1,300

How long does an EPDM roof last, and what guarantees come with it?

A well-specified EPDM roof typically lasts 25 to 50 years, and one BBA assessment of an EPDM membrane puts its expected life at 35 years or more. Problems usually come from poorly bonded upstands, damaged trims or ponding, rather than the rubber itself.

Three separate documents can sit behind an EPDM roof:

  • Manufacturer material guarantee: covers the membrane and, on some systems, the wider build-up. Many need registration and a specified build-up, so we register it for you where the system allows.
  • Our written workmanship guarantee: given on every re-roof, with the length set out in your quote.
  • Insurance-backed guarantee: an option worth asking about if you want cover that does not depend on the contractor still trading.

A BBA certificate is an assessment of the product, not a guarantee. Our guide to flat roof guarantees explains the differences, and the lifespan guide compares EPDM with the other systems.

What's included?

  • Strip-out of the old covering, with waste taken away
  • Written workmanship guarantee, plus manufacturer guarantee registration where available
  • EPDM membrane fully bonded, in one sheet where the roof size allows
  • Deck check and replacement of soft or rotten boards

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

EPDM rubber roofing in Thetford: questions

Do you cover Thetford?

Yes. Thetford is part of our Norfolk coverage, including postcode districts IP24. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Thetford?

Where the work needs approval it goes to Breckland Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does an EPDM rubber roof cost in Thetford?

£1,700–£2,950 for a typical 18 m² garage roof in EPDM, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can an EPDM roof be fitted in winter?

Yes, as long as the deck is dry. The adhesives are affected by cold and damp, so very cold or wet days can delay bonding, and the roof is kept temporarily weathertight between dry spells.

Can EPDM be laid over an old felt roof?

Sometimes, but we usually recommend stripping old felt first. Overlaying hides any rot or wet insulation underneath, and over a heated room a full replacement is often when insulation has to be added anyway.

Other flat roof work in Thetford

EPDM rubber roofing in Thetford: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price