Flat RoofingContractors

Flat roof systems

EPDM rubber roofing in Sutton in Ashfield

In Sutton in Ashfield and across Nottinghamshire, our teams fit EPDM rubber roofing to homes and small commercial buildings. The old covering is stripped, the deck is checked and repaired, insulation is added where the regulations call for it, and a new rubber membrane is bonded down with properly formed upstands and trims.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image

Sutton in Ashfield at a glance

Postcode districts
NG15, NG17
Population
about 36,404 (GeoNames)
Council area
Ashfield District Council
Building approval
Ashfield District Council building control, or a registered building control approver
Nearest main town
Mansfield, about 3 miles
Guide price region
East Midlands (−2% on West Midlands rates)

Why choose EPDM rubber roofing in Sutton in Ashfield?

If your Sutton in Ashfield roof has been patched more than once and the felt is cracking or blistering, a full replacement in EPDM can be better value than another repair. The rubber stays flexible through hot summers and freezing nights, and the replacement is the right point to bring the insulation up to standard.

In and around Sutton in Ashfield, flat roofs are typically found on newer estates where the first extension roofs are now being replaced, and on terraced streets with flat-roofed rear kitchens and bathrooms. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.

How much does an EPDM rubber roof cost in Sutton in Ashfield?

For Sutton in Ashfield we use East Midlands rates: £1,550–£2,750 is the guide for a typical 18 m² garage roof in EPDM, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,550–£2,750
Extension (20 m²), EPDM, new deck + insulation£2,750–£4,800
Porch or bay (4 m²), EPDM£750–£1,250

When is EPDM the right choice, and when is another system better?

EPDM is a strong choice for simple domestic roofs that people do not walk on, such as garages, single-storey extensions, porches and dormers. It is less suited to roofs with regular foot traffic or many pipes and vents.

Where it does well: few or no joins on small roofs, flexible in cold weather, tolerant of minor building movement, and laid without a flame.

Where it falls short: the finish is plain dark rubber, it can be punctured by dropped tools or sharp debris, and it is not designed as a walking surface without added protection. Roofs with many penetrations take a lot of careful detailing.

If you want a hard, walkable finish or a complex shape, GRP fibreglass often suits better. On a tight budget, or a larger roof where a layered system is preferred, torch-on felt is worth pricing. Liquid-applied roofing handles awkward details and overlays, single-ply membranes are built for larger commercial roofs, and mastic asphalt belongs on older and heritage buildings. Our EPDM vs GRP vs felt guide sets them side by side.

What's included?

  • Strip-out of the old covering, with waste taken away
  • Written workmanship guarantee, plus manufacturer guarantee registration where available
  • Deck check and replacement of soft or rotten boards
  • New drip and kerb trims, outlets and upstand details

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

EPDM rubber roofing in Sutton in Ashfield: questions

Do you cover Sutton in Ashfield?

Yes. Sutton in Ashfield is part of our Nottinghamshire coverage, including postcode districts NG15, NG17. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Sutton in Ashfield?

Where the work needs approval it goes to Ashfield District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does an EPDM rubber roof cost in Sutton in Ashfield?

£1,550–£2,750 for a typical 18 m² garage roof in EPDM, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

How long does it take to fit an EPDM roof?

A single garage typically takes one to two days and an insulated extension roof two to three, weather permitting. Larger roofs, scaffold and complex details add time.

Can a punctured EPDM roof be repaired?

Usually, yes. The area is cleaned and primed, then an EPDM patch or cover tape is bonded over the damage. If water has reached the deck, a survey first is sensible.

Other flat roof work in Sutton in Ashfield

EPDM rubber roofing in Sutton in Ashfield: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price