Flat RoofingContractors

Flat roof systems

EPDM rubber roofing across Shropshire

For EPDM rubber roofs in Shropshire, expect the same careful process wherever the property is: survey, fixed written quote, strip and install, then a final walk-round. Rainfall and wind exposure vary from site to site, so trims, fixings and adhesives are chosen for the roof in front of us rather than taken from a standard list.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image
Price per m²
£65–£115
Typical life
25–50 years
Manufacturer guarantees
20-year material warranties are common
Typical garage roof
£1,600–£2,800

Shropshire at a glance

Largest towns
Telford, Shrewsbury, Wellington, Oswestry
Postcode areas
SY, TF
Building control
Telford & Wrekin Council and Shropshire Council
Neighbouring areas
Staffordshire · West Midlands · Cheshire · Worcestershire
Guide price region
West Midlands (baseline rates)

How much does an EPDM rubber roof cost in Shropshire?

Guide prices including VAT at West Midlands rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,600–£2,800
Extension (20 m²), EPDM, new deck + insulation£2,800–£4,900
Porch or bay (4 m²), EPDM£750–£1,250

Which flat roofs are common in Shropshire?

Flat roofs in Shropshire sit on newer estates where the first extension roofs are now being replaced, low-rise post-war blocks of flats and 1930s semis with flat-roofed garages and kitchen extensions. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Shropshire the application goes to Telford & Wrekin Council and Shropshire Council. More on the rules.

Do I need building regulations approval to replace a roof with EPDM?

Often, yes. In England, Wales and Northern Ireland, re-covering more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof should be insulated towards the renovation standard where that is feasible; in Scotland, the council's building standards service decides whether a building warrant is needed.

An unheated detached garage normally falls outside these rules, and a patch repair is treated differently from a full re-cover.

In practice that means a warm roof: insulation above the deck, a vapour control layer beneath it and the EPDM on top. The extra thickness lifts the finished roof, so at survey we check door thresholds, window cills, wall flashings and upstand heights, aiming for an upstand of about 150 mm above the finished surface. Where approval is needed, we deal with building control or building standards for you. The building regulations page and our warm vs cold roof guide go into more detail.

How long does an EPDM roof last, and what guarantees come with it?

A well-specified EPDM roof typically lasts 25 to 50 years, and one BBA assessment of an EPDM membrane puts its expected life at 35 years or more. Problems usually come from poorly bonded upstands, damaged trims or ponding, rather than the rubber itself.

Three separate documents can sit behind an EPDM roof:

  • Manufacturer material guarantee: covers the membrane and, on some systems, the wider build-up. Many need registration and a specified build-up, so we register it for you where the system allows.
  • Our written workmanship guarantee: given on every re-roof, with the length set out in your quote.
  • Insurance-backed guarantee: an option worth asking about if you want cover that does not depend on the contractor still trading.

A BBA certificate is an assessment of the product, not a guarantee. Our guide to flat roof guarantees explains the differences, and the lifespan guide compares EPDM with the other systems.

Which towns in Shropshire do we cover?

EPDM rubber roofing in Shropshire: questions

Which towns in Shropshire do you cover?

All of Shropshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does an EPDM rubber roof cost in Shropshire?

£1,600–£2,800 for a typical 18 m² garage roof in EPDM, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which council handles building control for a flat roof in Shropshire?

It depends on where the roof is: in Shropshire that's Telford & Wrekin Council and Shropshire Council. Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. We confirm which applies at the survey.

Can EPDM be laid over an old felt roof?

Sometimes, but we usually recommend stripping old felt first. Overlaying hides any rot or wet insulation underneath, and over a heated room a full replacement is often when insulation has to be added anyway.

Can an EPDM roof be fitted in winter?

Yes, as long as the deck is dry. The adhesives are affected by cold and damp, so very cold or wet days can delay bonding, and the roof is kept temporarily weathertight between dry spells.

Does an EPDM roof need maintenance?

Very little. Clear leaves from outlets and gutters, look over trims and upstands once or twice a year and after storms, and keep foot traffic to a minimum.

Everything about EPDM rubber roofing → · All flat roofing in Shropshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price