Flat RoofingContractors

Flat roof systems

EPDM rubber roofing in Dinnington

Garage leaking, or an extension roof that has blistered and split? For property owners in Dinnington, EPDM rubber is a practical replacement. It is laid cold, copes with temperature swings and leaves few or no joins on a small roof. A free survey tells you whether the deck can be kept or needs replacing.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image

Dinnington at a glance

Postcode districts
S25
Population
about 19,860 (GeoNames)
Council area
Rotherham Council
Building approval
Rotherham Council building control, or a registered building control approver
Nearest main town
Rotherham, about 8 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

Why choose EPDM rubber roofing in Dinnington?

Rubber is a sensible pick in Dinnington where a roof sits close to bedrooms or a kitchen and you would rather avoid hot works. It suits porches, bays and dormers too, where the small area means a single sheet can cover the whole roof with no joins at all.

In and around Dinnington, flat roofs are typically found on low-rise post-war blocks of flats, and on 1930s semis with flat-roofed garages and kitchen extensions. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does an EPDM rubber roof cost in Dinnington?

For Dinnington we use Yorkshire and the Humber rates: £1,500–£2,650 is the guide for a typical 18 m² garage roof in EPDM, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650
Porch or bay (4 m²), EPDM£700–£1,200

How long does an EPDM roof last, and what guarantees come with it?

A well-specified EPDM roof typically lasts 25 to 50 years, and one BBA assessment of an EPDM membrane puts its expected life at 35 years or more. Problems usually come from poorly bonded upstands, damaged trims or ponding, rather than the rubber itself.

Three separate documents can sit behind an EPDM roof:

  • Manufacturer material guarantee: covers the membrane and, on some systems, the wider build-up. Many need registration and a specified build-up, so we register it for you where the system allows.
  • Our written workmanship guarantee: given on every re-roof, with the length set out in your quote.
  • Insurance-backed guarantee: an option worth asking about if you want cover that does not depend on the contractor still trading.

A BBA certificate is an assessment of the product, not a guarantee. Our guide to flat roof guarantees explains the differences, and the lifespan guide compares EPDM with the other systems.

What's included?

  • EPDM membrane fully bonded, in one sheet where the roof size allows
  • Strip-out of the old covering, with waste taken away
  • Deck check and replacement of soft or rotten boards
  • New drip and kerb trims, outlets and upstand details

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

EPDM rubber roofing in Dinnington: questions

Do you cover Dinnington?

Yes. Dinnington is part of our South Yorkshire coverage, including postcode districts S25. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Dinnington?

Where the work needs approval it goes to Rotherham Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does an EPDM rubber roof cost in Dinnington?

£1,500–£2,650 for a typical 18 m² garage roof in EPDM, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can you put a green roof on top of EPDM?

Yes. EPDM is often used under sedum, with a protection layer, drainage and growing medium laid on top. The structure must be able to carry the extra weight, which we check before quoting.

Can EPDM be laid over an old felt roof?

Sometimes, but we usually recommend stripping old felt first. Overlaying hides any rot or wet insulation underneath, and over a heated room a full replacement is often when insulation has to be added anyway.

Other flat roof work in Dinnington

EPDM rubber roofing in Dinnington: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price