Flat RoofingContractors

Flat roof systems

EPDM rubber roofing in Kingswinford

Rubber roofing for Kingswinford homes, landlords and small businesses: we strip, insulate where needed and re-cover flat roofs in EPDM, then finish the edges, outlets and wall upstands carefully. You deal with one contractor from survey to sign-off, and you get a written workmanship guarantee on every re-roof.

Roofer unrolling a single sheet of black EPDM membrane over a new OSB deck on a garage roofComputer-generated example image

Kingswinford at a glance

Postcode districts
DY6
Population
about 20,000 (GeoNames)
Council area
Dudley Council
Building approval
Dudley Council building control, or a registered building control approver
Nearest main town
Dudley, about 4 miles
Guide price region
West Midlands (baseline rates)

Why choose EPDM rubber roofing in Kingswinford?

For landlords with property in Kingswinford, EPDM's low upkeep is the main draw: once the outlets are kept clear and the trims are checked once or twice a year, there is little else to do. It also goes down quickly on a small roof, which keeps disruption for tenants to a minimum.

In and around Kingswinford, flat roofs are typically found on lock-up garage blocks on estates, and on newer estates where the first extension roofs are now being replaced. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.

How much does an EPDM rubber roof cost in Kingswinford?

For Kingswinford we use West Midlands rates: £1,600–£2,800 is the guide for a typical 18 m² garage roof in EPDM, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), EPDM rubber£1,600–£2,800
Extension (20 m²), EPDM, new deck + insulation£2,800–£4,900
Porch or bay (4 m²), EPDM£750–£1,250

How long does an EPDM roof last, and what guarantees come with it?

A well-specified EPDM roof typically lasts 25 to 50 years, and one BBA assessment of an EPDM membrane puts its expected life at 35 years or more. Problems usually come from poorly bonded upstands, damaged trims or ponding, rather than the rubber itself.

Three separate documents can sit behind an EPDM roof:

  • Manufacturer material guarantee: covers the membrane and, on some systems, the wider build-up. Many need registration and a specified build-up, so we register it for you where the system allows.
  • Our written workmanship guarantee: given on every re-roof, with the length set out in your quote.
  • Insurance-backed guarantee: an option worth asking about if you want cover that does not depend on the contractor still trading.

A BBA certificate is an assessment of the product, not a guarantee. Our guide to flat roof guarantees explains the differences, and the lifespan guide compares EPDM with the other systems.

What's included?

  • Strip-out of the old covering, with waste taken away
  • Deck check and replacement of soft or rotten boards
  • EPDM membrane fully bonded, in one sheet where the roof size allows
  • New drip and kerb trims, outlets and upstand details

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

EPDM rubber roofing in Kingswinford: questions

Do you cover Kingswinford?

Yes. Kingswinford is part of our West Midlands coverage, including postcode districts DY6. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Kingswinford?

Where the work needs approval it goes to Dudley Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does an EPDM rubber roof cost in Kingswinford?

£1,600–£2,800 for a typical 18 m² garage roof in EPDM, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can a punctured EPDM roof be repaired?

Usually, yes. The area is cleaned and primed, then an EPDM patch or cover tape is bonded over the damage. If water has reached the deck, a survey first is sensible.

Can you put a green roof on top of EPDM?

Yes. EPDM is often used under sedum, with a protection layer, drainage and growing medium laid on top. The structure must be able to carry the extra weight, which we check before quoting.

Other flat roof work in Kingswinford

EPDM rubber roofing in Kingswinford: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price