Cookstown at a glance
- Postcode districts
- BT80
- Population
- about 11,081 (GeoNames)
- Council area
- Mid Ulster District Council
- Building approval
- Mid Ulster District Council building control
- Nearest main town
- Craigavon, about 20 miles
- Guide price region
- Northern Ireland (−12% on West Midlands rates)
What makes a good extension roof in Cookstown?
Ponding against the house wall is a common reason for replacing an extension roof in Cookstown. When the deck dips near the wall or the fall runs the wrong way, water sits against the abutment and eventually gets in. A new roof with corrected falls moves the water to the gutter.
In a town like Cookstown, flat roofs are commonly found on bungalows with flat-roofed side extensions and dormers or newer estates where the first extension roofs are now being replaced. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.
How much does a new extension roof cost in Cookstown?
For Cookstown we use Northern Ireland rates: £2,450–£4,300 is the guide for a 20 m² extension roof in EPDM with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), EPDM, new deck + insulation | £2,450–£4,300 |
| Extension (20 m²), GRP, new deck + insulation | £2,650–£4,750 |
| Extension (20 m²), EPDM, insulation + 1 rooflight upstand | £2,650–£4,600 |
| Single garage (18 m²), EPDM rubber | £1,400–£2,450 |
Why does water pond or leak where the extension meets the house?
Usually because the fall runs the wrong way, the abutment detail has failed, or the roof has sagged close to the wall. The junction with the house is the most common leak point on an extension roof.
If the roof falls towards the house, or the deck dips near the wall, water sits against the upstand and finds any weakness in the flashing above. Older roofs often have the felt simply turned up the brickwork with no cover flashing, or a flashing that has pulled out of its joint. A patch will not change a fall. We re-firr or use tapered insulation so water runs away from the wall, then form a new upstand, usually 150 mm above the finished roof, with a flashing chased into the mortar joint.
Rooflights and lanterns are the other weak point. A lantern needs a properly built kerb with the membrane dressed up and under its frame. We rebuild rooflight upstands within the roof job; we do not supply the lantern itself. Our guide to ponding water explains the causes in more depth.
What's included?
- Falls set away from the house wall
- Free survey of the roof, abutment and room below
- New deck, vapour control layer and warm-roof insulation
- Building control handled where needed, and a written workmanship guarantee
Building control in Northern Ireland
In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.
Which nearby areas do we also cover?
Extension and kitchen roofs in Cookstown: questions
Do you cover Cookstown?
Yes. Cookstown is part of our County Tyrone coverage, including postcode districts BT80. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Cookstown?
Where the work needs approval it goes to Mid Ulster District Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a new extension roof cost in Cookstown?
£2,450–£4,300 for a 20 m² extension roof in EPDM with a new deck and insulation, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Is EPDM or GRP better for a kitchen extension?
Neither is better in every case. EPDM suits simple rectangular roofs with few details, while GRP is often chosen where there are rooflights, corners or occasional foot traffic.
Can you keep my existing roof lantern?
Often, if the lantern itself is sound. We lift it, rebuild the kerb, dress the new membrane up the upstand and refit the lantern.