Flat RoofingContractors

Repairs and surveys

Flat roof repairs in Portsmouth

Split seams, lifted upstands, blocked outlets and loose drip trims are typical flat roof faults, and we repair all of them for homes, landlords and businesses in Portsmouth and the surrounding parts of Hampshire. The cause is traced first, the price is confirmed in writing, and then the work is done with compatible materials.

Roofer cutting out a blister on an old mineral felt flat roof before a patch repairComputer-generated example image

Portsmouth at a glance

Postcode districts
PO1, PO2, PO3, PO4, PO5, PO6
Population
about 208,100 (GeoNames)
Council area
Portsmouth City Council
Building approval
Portsmouth City Council building control, or a registered building control approver
Nearest main town
Southampton, about 15 miles
Guide price region
South East (+10% on West Midlands rates)

When is a repair the right answer in Portsmouth?

Older flat roofs in Portsmouth, as elsewhere, are often covered in felt that has lost its chippings and dried out. One leak on a roof like that is a warning sign. We repair it, check the rest of the covering and tell you honestly whether replacement belongs in next year's budget.

In and around Portsmouth, flat roofs are typically found on 1960s and 1970s link-detached houses with flat-roofed garages and porches, and on terraced streets with flat-roofed rear kitchens and bathrooms. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.

How much does a flat roof repair cost in Portsmouth?

At South East guide rates, a localised patch repair comes to £170–£550 including VAT. We confirm the price once we've traced the leak or seen the damage.

JobGuide price inc VAT
Localised patch repair£170–£550
Upstand or flashing repair£280–£720
Outlet or drainage repair£130–£390
Emergency temporary weatherproofing visit£200–£500
Condition survey and leak investigation£170–£330

Which repair materials work with my type of flat roof?

The repair has to use the same system as the roof, because many flat roof materials don't bond to each other and some damage each other.

  • Torch-on felt: repaired with compatible bitumen membrane, cut back to sound felt and lapped well beyond the defect. Torching near timber, insulation or fascias needs care, and some details are better done with cold-applied methods.
  • EPDM rubber: repaired with EPDM patches and the manufacturer's primer and seam tape. Bitumen products and many general-purpose sealants won't bond to EPDM and shouldn't be used on it.
  • GRP fibreglass: the area is ground back, then new resin and glass matting are laid and finished with topcoat to match.
  • Liquid-applied and single-ply: repaired with the same manufacturer's products wherever possible, as mixing systems can affect a material guarantee.
  • Mastic asphalt: cracks and blisters are cut out and made good with new asphalt by an operative who works with it.

A tin of roof sealant or bitumen paint may stop a drip for a while, but on the wrong membrane it makes a proper repair harder later.

What's included?

  • Outlets and gutters cleared while we're on the roof
  • Inspection of the whole roof, not just the wet patch
  • Repairs with materials compatible with your roof system
  • Upstands, flashings, laps and seams made good

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Flat roof repairs in Portsmouth: questions

Do you cover Portsmouth?

Yes. Portsmouth is part of our Hampshire coverage, including postcode districts PO1, PO2, PO3, PO4, PO5, PO6. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Portsmouth?

Where the work needs approval it goes to Portsmouth City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a flat roof repair cost in Portsmouth?

£170–£550 for a localised patch repair, at South East guide rates including VAT. We confirm the price once we've traced the leak or seen the damage.

Do I need building regulations approval for a flat roof repair?

Not usually for a patch repair. Replacing a large part of the covering over a heated room is treated differently and can bring in the thermal upgrade rules.

How long does a flat roof repair take?

Most small repairs take a few hours on site once the roof is dry. Larger upstand or outlet repairs can take a day or more, and setting up scaffold or access equipment adds time.

Other flat roof work in Portsmouth

Flat roof repairs in Portsmouth: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price