Flat RoofingContractors

Roofs we replace and build

Flat roof replacement across Bedfordshire

We replace flat roofs across Bedfordshire, from single garages and kitchen extensions to blocks of flats and small commercial units. Every job begins with a free survey and a fixed written quote, and the work is carried out by vetted roofing teams working under S&K. Use the guide prices to set a budget, then book a survey for an exact figure.

Flat roof stripped back to joists with firrings and new OSB3 deck boards being laid on a terrace offshootComputer-generated example image
Guide price
£2,950–£5,150
Survey
Free for new and replacement roofs
Quote
Fixed, in writing
Coverage
England, Wales, Scotland, NI

Bedfordshire at a glance

Largest towns
Luton, Bedford, Dunstable, Leighton Buzzard
Postcode areas
LU, MK, SG
Building control
Luton Borough Council, Bedford Borough Council and Central Bedfordshire Council
Neighbouring areas
Hertfordshire · Buckinghamshire · Northamptonshire · Cambridgeshire
Guide price region
East of England (+5% on West Midlands rates)

How much does a flat roof replacement cost in Bedfordshire?

Guide prices including VAT at East of England rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), EPDM, new deck + insulation£2,950–£5,150
Single garage (18 m²), torch-on felt£1,600–£2,750
Extension (20 m²), GRP, new deck + insulation£3,150–£5,650
Single garage (18 m²), EPDM rubber£1,700–£2,950

Which flat roofs are common in Bedfordshire?

Flat roofs in Bedfordshire sit on 1930s semis with flat-roofed garages and kitchen extensions, newer estates where the first extension roofs are now being replaced and low-rise post-war blocks of flats. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Bedfordshire the application goes to Luton Borough Council, Bedford Borough Council and Central Bedfordshire Council. More on the rules.

Which system should I replace my flat roof with?

The right system depends on the roof's size, shape, use and number of details, so no single material suits every roof. These are the usual starting points:

  • EPDM rubber suits simple, rectangular roofs, where one sheet can often cover the area with few or no joins.
  • GRP fibreglass suits roofs with many corners, rooflights or edges, and gives a rigid surface for occasional maintenance traffic.
  • Torch-on felt is a layered, hard-wearing system that keeps the cost down on larger or plain roofs.
  • Liquid-applied systems handle awkward details and can overlay a sound existing surface.
  • Single-ply and mastic asphalt are more usual on commercial roofs, blocks and terraces.

We recommend a system at survey and explain why. Our EPDM vs GRP vs felt guide sets out the trade-offs if you want to compare first.

Should I overlay my old flat roof or strip it fully?

Strip it fully if the deck is soft, the insulation is wet or the falls are wrong; an overlay only suits a dry, sound roof that already drains well. Covering a wet roof traps the moisture, and rot carries on out of sight.

An overlay also raises the roof level, eating into upstand height at walls and door thresholds, and every layer adds weight. In England, a covering that adds 15% or more to the roof's weight needs building control approval. Signs it is time to replace rather than repair:

  • ponding that lingers long after rain
  • blisters, cracking or crazing across wide areas
  • bare bitumen where the mineral chippings have gone
  • split laps and lifted upstands or flashings
  • damp ceilings, or a deck that has gone soft
  • leaks that return after each repair

A single defect on an otherwise dry roof can usually be put right with a repair. If you're unsure, a survey settles it, and our guides to overlay or strip and repair or replace go further.

Which towns in Bedfordshire do we cover?

Flat roof replacement in Bedfordshire: questions

Which towns in Bedfordshire do you cover?

All of Bedfordshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a flat roof replacement cost in Bedfordshire?

£2,950–£5,150 for a 20 m² extension roof in EPDM with a new deck and insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which postcode areas do you cover in Bedfordshire?

All of Bedfordshire, including the LU, MK, SG postcode areas. Send your full postcode and we'll confirm.

Will a replacement make my roof higher?

Usually a little, if insulation is added above the deck. We check door thresholds, window sills, upstands and wall flashings at survey so the new level works.

What guarantees come with a replacement roof?

Every re-roof comes with a written workmanship guarantee, with the length set out in your quote. Manufacturer material guarantees are available on many systems and we register them for you where the system allows; ask about insurance-backed options too.

What time of year is best for a flat roof replacement?

Late spring to early autumn gives the most reliable dry spells, but a roof can be replaced in any season when the forecast allows. Adhesives and resins have minimum application temperatures, so winter work is planned around mild, dry days.

Everything about flat roof replacement → · All flat roofing in Bedfordshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price