Flat RoofingContractors

Roofs we replace and build

Flat roof replacement across Bristol

Across Bristol, flat roofs come in every age and condition, so we never assume a re-cover is enough. Our surveys check the deck, the falls and the insulation before we recommend a system. Where a replacement is needed, we strip back, rebuild properly and handle building control or building standards where the work requires it.

Flat roof stripped back to joists with firrings and new OSB3 deck boards being laid on a terrace offshootComputer-generated example image
Guide price
£2,900–£5,050
Survey
Free for new and replacement roofs
Quote
Fixed, in writing
Coverage
England, Wales, Scotland, NI

Bristol at a glance

Largest towns
Bristol
Postcode areas
BS
Building control
Bristol City Council
Neighbouring areas
Somerset · Gloucestershire · Wiltshire · Herefordshire
Guide price region
South West (+3% on West Midlands rates)

How much does a flat roof replacement cost in Bristol?

Guide prices including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), EPDM, new deck + insulation£2,900–£5,050
Single garage (18 m²), torch-on felt£1,550–£2,700
Extension (20 m²), GRP, new deck + insulation£3,100–£5,550
Single garage (18 m²), EPDM rubber£1,650–£2,900

Which flat roofs are common in Bristol?

Flat roofs in Bristol sit on shops with flat-roofed rear stores below flats, lock-up garage blocks on estates and low-rise post-war blocks of flats. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Bristol the application goes to Bristol City Council. More on the rules.

Which system should I replace my flat roof with?

The right system depends on the roof's size, shape, use and number of details, so no single material suits every roof. These are the usual starting points:

  • EPDM rubber suits simple, rectangular roofs, where one sheet can often cover the area with few or no joins.
  • GRP fibreglass suits roofs with many corners, rooflights or edges, and gives a rigid surface for occasional maintenance traffic.
  • Torch-on felt is a layered, hard-wearing system that keeps the cost down on larger or plain roofs.
  • Liquid-applied systems handle awkward details and can overlay a sound existing surface.
  • Single-ply and mastic asphalt are more usual on commercial roofs, blocks and terraces.

We recommend a system at survey and explain why. Our EPDM vs GRP vs felt guide sets out the trade-offs if you want to compare first.

Do I need building regulations approval to replace a flat roof?

Often, yes. Replacing the covering of a flat roof over a heated room is usually treated as renovating a thermal element, which brings insulation requirements and, in most cases, approval.

In England, if more than half of that roof is renovated, the whole roof should be upgraded towards a U-value of 0.16 W/m²K for homes (0.18 for non-domestic buildings) where that is technically, functionally and economically feasible, judged against a simple payback of 15 years. Approval comes from building control or self-certification through a registered competent person scheme. Structural changes, or a covering that adds 15% or more to the roof's weight, also need approval.

The other nations differ: most re-roofing in Wales needs approval, Scotland works through building standards and the building warrant, and in Northern Ireland you contact the district council's building control first. An unheated detached garage is not normally a thermal element. Planning permission is not usually needed if the roof looks much the same afterwards, though listed buildings and conservation areas are different. We handle approvals where needed; see building regulations.

Which towns in Bristol do we cover?

Flat roof replacement in Bristol: questions

Which towns in Bristol do you cover?

All of Bristol. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a flat roof replacement cost in Bristol?

£2,900–£5,050 for a 20 m² extension roof in EPDM with a new deck and insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which postcode areas do you cover in Bristol?

All of Bristol, including the BS postcode areas. Send your full postcode and we'll confirm.

What time of year is best for a flat roof replacement?

Late spring to early autumn gives the most reliable dry spells, but a roof can be replaced in any season when the forecast allows. Adhesives and resins have minimum application temperatures, so winter work is planned around mild, dry days.

What guarantees come with a replacement roof?

Every re-roof comes with a written workmanship guarantee, with the length set out in your quote. Manufacturer material guarantees are available on many systems and we register them for you where the system allows; ask about insurance-backed options too.

Will a new flat roof be better insulated than the old one?

If it is over a heated room, yes. A full replacement usually has to be upgraded towards current insulation levels where feasible, and we build it as a warm roof with the insulation above the deck.

Everything about flat roof replacement → · All flat roofing in Bristol →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price