Flat RoofingContractors

Roofs we replace and build

Flat roof replacement in Ellesmere Port

We replace flat roofs on houses, flats and small commercial buildings in Ellesmere Port. The work covers everything from the timber deck up: falls set to drain, a warm-roof build-up where the room below is heated, upstands formed properly at walls and rooflights, and new trims and outlets. Building control is handled for you where it applies.

Flat roof stripped back to joists with firrings and new OSB3 deck boards being laid on a terrace offshootComputer-generated example image

Ellesmere Port at a glance

Postcode districts
CH64, CH65, CH66
Population
about 65,430 (GeoNames)
Council area
Cheshire West and Chester Council
Building approval
Cheshire West and Chester Council building control, or a registered building control approver
Nearest main town
Chester, about 6 miles
Guide price region
North West (−5% on West Midlands rates)

When should a flat roof in Ellesmere Port be replaced?

A sensible moment to replace a flat roof in Ellesmere Port is when other work is planned on the house, such as a kitchen refit below, new windows or a loft conversion. Doing the roof first protects the new work, and it is the natural time to upgrade insulation to the level the regulations expect for a renovated roof.

Around Ellesmere Port, flat roofs are common on 1960s and 1970s link-detached houses with flat-roofed garages and porches and on 1930s semis with flat-roofed garages and kitchen extensions. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour.

How much does a flat roof replacement cost in Ellesmere Port?

At North West guide rates, a 20 m² extension roof in EPDM with a new deck and insulation comes to £2,650–£4,650 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650
Single garage (18 m²), torch-on felt£1,450–£2,500
Extension (20 m²), GRP, new deck + insulation£2,850–£5,100
Single garage (18 m²), EPDM rubber£1,500–£2,650

Should I overlay my old flat roof or strip it fully?

Strip it fully if the deck is soft, the insulation is wet or the falls are wrong; an overlay only suits a dry, sound roof that already drains well. Covering a wet roof traps the moisture, and rot carries on out of sight.

An overlay also raises the roof level, eating into upstand height at walls and door thresholds, and every layer adds weight. In England, a covering that adds 15% or more to the roof's weight needs building control approval. Signs it is time to replace rather than repair:

  • ponding that lingers long after rain
  • blisters, cracking or crazing across wide areas
  • bare bitumen where the mineral chippings have gone
  • split laps and lifted upstands or flashings
  • damp ceilings, or a deck that has gone soft
  • leaks that return after each repair

A single defect on an otherwise dry roof can usually be put right with a repair. If you're unsure, a survey settles it, and our guides to overlay or strip and repair or replace go further.

What's included?

  • New deck, firrings and warm-roof insulation where needed
  • Fixed written quote listing the full build-up
  • Strip-out of the old covering, with waste and skip
  • New membrane, upstands, edge trims and outlets

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Flat roof replacement in Ellesmere Port: questions

Do you cover Ellesmere Port?

Yes. Ellesmere Port is part of our Cheshire coverage, including postcode districts CH64, CH65, CH66. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Ellesmere Port?

Where the work needs approval it goes to Cheshire West and Chester Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a flat roof replacement cost in Ellesmere Port?

£2,650–£4,650 for a 20 m² extension roof in EPDM with a new deck and insulation, at North West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Will a new flat roof be better insulated than the old one?

If it is over a heated room, yes. A full replacement usually has to be upgraded towards current insulation levels where feasible, and we build it as a warm roof with the insulation above the deck.

Is VAT charged on a flat roof replacement?

Yes, roof replacement is standard-rated at 20%, and an insulated replacement is treated as a single supply. Our guide prices already include VAT.

Other flat roof work in Ellesmere Port

Flat roof replacement in Ellesmere Port: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price