Flat RoofingContractors

Roofs we replace and build

Flat roof replacement in Pitsea

Old felt. Tired boards. Water standing for days after rain. Those are the roofs we replace in Pitsea. Each job begins with a survey and a written price, then a full strip and rebuild in the system that suits your roof, finished with fresh edges and outlets so water leaves the roof quickly.

Flat roof stripped back to joists with firrings and new OSB3 deck boards being laid on a terrace offshootComputer-generated example image

Pitsea at a glance

Postcode districts
SS13
Population
about 25,000 (GeoNames)
Council area
Basildon Council
Building approval
Basildon Council building control, or a registered building control approver
Nearest main town
Basildon, about 2 miles
Guide price region
East of England (+5% on West Midlands rates)

When should a flat roof in Pitsea be replaced?

Selling or letting a property in Pitsea can also prompt a replacement. A buyer's surveyor will usually flag a flat roof near the end of its life, and a recent replacement with written workmanship and material guarantees answers that question before it turns into a negotiation point.

Around Pitsea, flat roofs are common on newer estates where the first extension roofs are now being replaced and on shops with flat-roofed rear stores below flats. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.

How much does a flat roof replacement cost in Pitsea?

At East of England guide rates, a 20 m² extension roof in EPDM with a new deck and insulation comes to £2,950–£5,150 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), EPDM, new deck + insulation£2,950–£5,150
Single garage (18 m²), torch-on felt£1,600–£2,750
Extension (20 m²), GRP, new deck + insulation£3,150–£5,650
Single garage (18 m²), EPDM rubber£1,700–£2,950

Which system should I replace my flat roof with?

The right system depends on the roof's size, shape, use and number of details, so no single material suits every roof. These are the usual starting points:

  • EPDM rubber suits simple, rectangular roofs, where one sheet can often cover the area with few or no joins.
  • GRP fibreglass suits roofs with many corners, rooflights or edges, and gives a rigid surface for occasional maintenance traffic.
  • Torch-on felt is a layered, hard-wearing system that keeps the cost down on larger or plain roofs.
  • Liquid-applied systems handle awkward details and can overlay a sound existing surface.
  • Single-ply and mastic asphalt are more usual on commercial roofs, blocks and terraces.

We recommend a system at survey and explain why. Our EPDM vs GRP vs felt guide sets out the trade-offs if you want to compare first.

What's included?

  • New membrane, upstands, edge trims and outlets
  • New deck, firrings and warm-roof insulation where needed
  • Fixed written quote listing the full build-up
  • Strip-out of the old covering, with waste and skip

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Flat roof replacement in Pitsea: questions

Do you cover Pitsea?

Yes. Pitsea is part of our Essex coverage, including postcode districts SS13. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Pitsea?

Where the work needs approval it goes to Basildon Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a flat roof replacement cost in Pitsea?

£2,950–£5,150 for a 20 m² extension roof in EPDM with a new deck and insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is VAT charged on a flat roof replacement?

Yes, roof replacement is standard-rated at 20%, and an insulated replacement is treated as a single supply. Our guide prices already include VAT.

Will a new flat roof be better insulated than the old one?

If it is over a heated room, yes. A full replacement usually has to be upgraded towards current insulation levels where feasible, and we build it as a warm roof with the insulation above the deck.

Other flat roof work in Pitsea

Flat roof replacement in Pitsea: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price