Perth at a glance
- Postcode districts
- PH1
- Population
- about 47,350 (GeoNames)
- Council area
- Perth and Kinross Council
- Building approval
- Perth and Kinross Council building standards
- Nearest main town
- Dundee, about 18 miles
- Guide price region
- Scotland (−5% on West Midlands rates)
When should a flat roof in Perth be replaced?
Selling or letting a property in Perth can also prompt a replacement. A buyer's surveyor will usually flag a flat roof near the end of its life, and a recent replacement with written workmanship and material guarantees answers that question before it turns into a negotiation point.
In and around Perth, flat roofs are typically found on terraced streets with flat-roofed rear kitchens and bathrooms, and on 1930s semis with flat-roofed garages and kitchen extensions. Scotland averages roughly 1,570 mm of rain a year, with the west far wetter than the east, so drainage, falls and wind uplift are part of every specification we write.
How much does a flat roof replacement cost in Perth?
Guide price in Perth: £2,650–£4,650 for a 20 m² extension roof in EPDM with a new deck and insulation, including VAT at Scotland rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
| Single garage (18 m²), torch-on felt | £1,450–£2,500 |
| Extension (20 m²), GRP, new deck + insulation | £2,850–£5,100 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
Which system should I replace my flat roof with?
The right system depends on the roof's size, shape, use and number of details, so no single material suits every roof. These are the usual starting points:
- EPDM rubber suits simple, rectangular roofs, where one sheet can often cover the area with few or no joins.
- GRP fibreglass suits roofs with many corners, rooflights or edges, and gives a rigid surface for occasional maintenance traffic.
- Torch-on felt is a layered, hard-wearing system that keeps the cost down on larger or plain roofs.
- Liquid-applied systems handle awkward details and can overlay a sound existing surface.
- Single-ply and mastic asphalt are more usual on commercial roofs, blocks and terraces.
We recommend a system at survey and explain why. Our EPDM vs GRP vs felt guide sets out the trade-offs if you want to compare first.
What's included?
- Free survey of the deck, falls, edges and insulation
- Strip-out of the old covering, with waste and skip
- New deck, firrings and warm-roof insulation where needed
- Fixed written quote listing the full build-up
Building standards in Scotland
In Scotland the building standards technical handbooks (Section 6 for energy) apply, and the council's building standards service decides whether a building warrant is needed. Like-for-like repairs to a roof covering can be exempt; alterations, structural work and new roofs usually need a warrant before work starts. The domestic roof benchmark is 0.12 W/m²K, applied as far as reasonably practicable on an existing roof. More on the rules.
Which nearby areas do we also cover?
- Blairgowrie and Rattray · 14 mi
- Crieff · 16 mi
- Cupar · 17 mi
- Glenrothes · 17 mi
- Dundee · 18 mi
- Cowdenbeath · 20 mi
Flat roof replacement in Perth: questions
Do you cover Perth?
Yes. Perth is part of our Perth and Kinross coverage, including postcode districts PH1. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building standards for a flat roof in Perth?
Where the work needs approval it goes to Perth and Kinross Council building standards. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a flat roof replacement cost in Perth?
£2,650–£4,650 for a 20 m² extension roof in EPDM with a new deck and insulation, at Scotland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
What time of year is best for a flat roof replacement?
Late spring to early autumn gives the most reliable dry spells, but a roof can be replaced in any season when the forecast allows. Adhesives and resins have minimum application temperatures, so winter work is planned around mild, dry days.
Do I need to be at home while the roof is replaced?
Not for most of the job, as long as the team can reach the roof and there is room for a skip. We ask you to be there at the start to agree the plan and at the end to look over the finished roof.