Flat RoofingContractors

Roofs we replace and build

Flat roof replacement in Maltby

Old felt. Tired boards. Water standing for days after rain. Those are the roofs we replace in Maltby. Each job begins with a survey and a written price, then a full strip and rebuild in the system that suits your roof, finished with fresh edges and outlets so water leaves the roof quickly.

Flat roof stripped back to joists with firrings and new OSB3 deck boards being laid on a terrace offshootComputer-generated example image

Maltby at a glance

Postcode districts
S66
Population
about 17,513 (GeoNames)
Council area
Rotherham Council
Building approval
Rotherham Council building control, or a registered building control approver
Nearest main town
Rotherham, about 7 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

When should a flat roof in Maltby be replaced?

Flat roofs in Maltby get replaced for the same reasons as anywhere else: the covering has reached the end of its service life, leaks keep returning after repairs, or water ponds because the deck has sagged. Once the boards are soft or the insulation is wet, a full strip usually costs less than another round of patching.

Maltby's flat roofs are mostly on low-rise post-war blocks of flats, with plenty on bungalows with flat-roofed side extensions and dormers too. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does a flat roof replacement cost in Maltby?

At Yorkshire and the Humber guide rates, a 20 m² extension roof in EPDM with a new deck and insulation comes to £2,650–£4,650 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650
Single garage (18 m²), torch-on felt£1,450–£2,500
Extension (20 m²), GRP, new deck + insulation£2,850–£5,100
Single garage (18 m²), EPDM rubber£1,500–£2,650

Which system should I replace my flat roof with?

The right system depends on the roof's size, shape, use and number of details, so no single material suits every roof. These are the usual starting points:

  • EPDM rubber suits simple, rectangular roofs, where one sheet can often cover the area with few or no joins.
  • GRP fibreglass suits roofs with many corners, rooflights or edges, and gives a rigid surface for occasional maintenance traffic.
  • Torch-on felt is a layered, hard-wearing system that keeps the cost down on larger or plain roofs.
  • Liquid-applied systems handle awkward details and can overlay a sound existing surface.
  • Single-ply and mastic asphalt are more usual on commercial roofs, blocks and terraces.

We recommend a system at survey and explain why. Our EPDM vs GRP vs felt guide sets out the trade-offs if you want to compare first.

What's included?

  • Building control handled where needed, plus a written workmanship guarantee
  • Free survey of the deck, falls, edges and insulation
  • Fixed written quote listing the full build-up
  • New membrane, upstands, edge trims and outlets

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Flat roof replacement in Maltby: questions

Do you cover Maltby?

Yes. Maltby is part of our South Yorkshire coverage, including postcode districts S66. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Maltby?

Where the work needs approval it goes to Rotherham Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a flat roof replacement cost in Maltby?

£2,650–£4,650 for a 20 m² extension roof in EPDM with a new deck and insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Will a replacement make my roof higher?

Usually a little, if insulation is added above the deck. We check door thresholds, window sills, upstands and wall flashings at survey so the new level works.

Do I need to be at home while the roof is replaced?

Not for most of the job, as long as the team can reach the roof and there is room for a skip. We ask you to be there at the start to agree the plan and at the end to look over the finished roof.

Other flat roof work in Maltby

Flat roof replacement in Maltby: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price