Burgess Hill at a glance
- Postcode districts
- RH15
- Population
- about 30,635 (GeoNames)
- Council area
- Mid Sussex District Council
- Building approval
- Mid Sussex District Council building control, or a registered building control approver
- Nearest main town
- Brighton, about 9 miles
- Guide price region
- South East (+10% on West Midlands rates)
When should a flat roof in Burgess Hill be replaced?
Selling or letting a property in Burgess Hill can also prompt a replacement. A buyer's surveyor will usually flag a flat roof near the end of its life, and a recent replacement with written workmanship and material guarantees answers that question before it turns into a negotiation point.
Burgess Hill's flat roofs are mostly on newer estates where the first extension roofs are now being replaced, with plenty on 1930s semis with flat-roofed garages and kitchen extensions too. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.
How much does a flat roof replacement cost in Burgess Hill?
At South East guide rates, a 20 m² extension roof in EPDM with a new deck and insulation comes to £3,100–£5,350 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), EPDM, new deck + insulation | £3,100–£5,350 |
| Single garage (18 m²), torch-on felt | £1,650–£2,900 |
| Extension (20 m²), GRP, new deck + insulation | £3,300–£5,900 |
| Single garage (18 m²), EPDM rubber | £1,750–£3,100 |
Which system should I replace my flat roof with?
The right system depends on the roof's size, shape, use and number of details, so no single material suits every roof. These are the usual starting points:
- EPDM rubber suits simple, rectangular roofs, where one sheet can often cover the area with few or no joins.
- GRP fibreglass suits roofs with many corners, rooflights or edges, and gives a rigid surface for occasional maintenance traffic.
- Torch-on felt is a layered, hard-wearing system that keeps the cost down on larger or plain roofs.
- Liquid-applied systems handle awkward details and can overlay a sound existing surface.
- Single-ply and mastic asphalt are more usual on commercial roofs, blocks and terraces.
We recommend a system at survey and explain why. Our EPDM vs GRP vs felt guide sets out the trade-offs if you want to compare first.
What's included?
- Free survey of the deck, falls, edges and insulation
- New deck, firrings and warm-roof insulation where needed
- New membrane, upstands, edge trims and outlets
- Strip-out of the old covering, with waste and skip
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Haywards Heath · 3 mi
- Lewes · 8 mi
- Portslade · 9 mi
- Brighton · 9 mi
- Uckfield · 10 mi
- Shoreham-by-Sea · 11 mi
Flat roof replacement in Burgess Hill: questions
Do you cover Burgess Hill?
Yes. Burgess Hill is part of our West Sussex coverage, including postcode districts RH15. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Burgess Hill?
Where the work needs approval it goes to Mid Sussex District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a flat roof replacement cost in Burgess Hill?
£3,100–£5,350 for a 20 m² extension roof in EPDM with a new deck and insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Do I need to be at home while the roof is replaced?
Not for most of the job, as long as the team can reach the roof and there is room for a skip. We ask you to be there at the start to agree the plan and at the end to look over the finished roof.
Will a new flat roof be better insulated than the old one?
If it is over a heated room, yes. A full replacement usually has to be upgraded towards current insulation levels where feasible, and we build it as a warm roof with the insulation above the deck.