Pencoed at a glance
- Postcode districts
- CF35
- Population
- about 9,166 (GeoNames)
- Council area
- Bridgend County Borough Council
- Building approval
- Bridgend County Borough Council building control, or a registered building control approver
- Nearest main town
- Bridgend, about 4 miles
- Guide price region
- Wales (−8% on West Midlands rates)
When is a flat roof survey worth it in Pencoed?
Landlords and managing agents in Pencoed often need a written record of a roof's condition, for budgeting, for leaseholders, or to show a problem has been looked at properly. A survey report gives them a clear basis for deciding when to repair and when to replace.
In and around Pencoed, flat roofs are typically found on bungalows with flat-roofed side extensions and dormers, and on lock-up garage blocks on estates. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a flat roof survey cost in Pencoed?
Guide price in Pencoed: £140–£280 for a condition survey and leak investigation, including VAT at Wales rates. We confirm the price once we've traced the leak or seen the damage.
| Job | Guide price inc VAT |
|---|---|
| Condition survey and leak investigation | £140–£280 |
| Localised patch repair | £140–£460 |
| Upstand or flashing repair | £230–£600 |
| Emergency temporary weatherproofing visit | £170–£410 |
What does a flat roof survey report cover?
The report sets out what the roof is, what condition it is in and what we recommend, in plain language.
- The roof system, approximate area and how the roof is built, as far as can be seen.
- The condition of the covering: splits, blisters, crazing, lost chippings, open laps and wear.
- Upstands, flashings, edge trims and rooflights.
- Falls, ponding and the state of outlets and gutters.
- Moisture readings and the findings of any core samples.
- The likely cause of any leak, and how confident we are in it.
- Recommended action, ranked by urgency, with guide costs.
We are clear about what we could and couldn't see. A survey can't inspect hidden timbers without opening them up, and we will say where a finding is an inference rather than a direct observation.
What's included?
- Plain written report with ranked recommendations
- Moisture meter readings across the roof
- Inspection of the covering, upstands, edges and outlets
- Core samples where readings need confirming
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
- Bridgend · 4 mi
- Aberkenfig · 4 mi
- Tonyrefail · 5 mi
- Llantrisant · 6 mi
- Tonypandy · 7 mi
- Llantwit Major · 8 mi
Flat roof surveys and leak tracing in Pencoed: questions
Do you cover Pencoed?
Yes. Pencoed is part of our Bridgend coverage, including postcode districts CF35. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Pencoed?
Where the work needs approval it goes to Bridgend County Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a flat roof survey cost in Pencoed?
£140–£280 for a condition survey and leak investigation, at Wales guide rates including VAT. We confirm the price once we've traced the leak or seen the damage.
Do you survey commercial and block roofs?
Yes. We survey flat roofs on shops, offices, units, blocks of flats and HMOs, with the report structured so a landlord, managing agent or owner can plan and budget the work.
Is a core sample damaging to the roof?
It's a small, deliberate opening that is sealed again with compatible material before we leave. It shouldn't affect how the roof performs.