- Guide price
- £140–£290
- Repair price
- Confirmed once the leak or damage is found
- Condition survey report
- £140–£290
- Coverage
- England, Wales, Scotland, NI
Greater Manchester at a glance
- Largest towns
- Manchester, Oldham, Wigan, Bolton
- Postcode areas
- BL, M, OL, SK, WA, WN
- Building control
- Manchester City Council, Oldham Council, Wigan Council and 7 other councils
- Neighbouring areas
- Cheshire · Lancashire · Merseyside · West Yorkshire
- Guide price region
- North West (−5% on West Midlands rates)
How much does a flat roof survey cost in Greater Manchester?
Guide prices including VAT at North West rates. We confirm the price once we've traced the leak or seen the damage.
| Job | Guide price inc VAT |
|---|---|
| Condition survey and leak investigation | £140–£290 |
| Localised patch repair | £140–£480 |
| Upstand or flashing repair | £240–£620 |
| Emergency temporary weatherproofing visit | £170–£430 |
Which flat roofs are common in Greater Manchester?
Flat roofs in Greater Manchester sit on 1930s semis with flat-roofed garages and kitchen extensions, shops with flat-roofed rear stores below flats and lock-up garage blocks on estates. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour. Approximate 1991–2020 regional averages based on Met Office data.
Building regulations in England
Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Greater Manchester the application goes to Manchester City Council, Oldham Council, Wigan Council and 7 other councils. More on the rules.
How do you find where a flat roof is leaking?
By working from the evidence inside back to the likely entry points outside, then confirming the path with moisture readings and, where needed, small test openings.
We start indoors, looking at where the staining is, when it appears and whether it follows rain, wind from one direction or cold weather. Then, on the roof, we check the details where most leaks start: upstands and flashings, laps and seams, outlets, gutters, edge trims, rooflight kerbs and anything that passes through the covering. Walls, copings and cavity trays above the roof are checked too, because water getting in behind an upstand can look like a roof leak.
A moisture meter shows where the covering, or the material beneath it, is holding water, and readings across the roof help map how far the wet has spread. Meter readings are a guide, not proof, so where they suggest a problem we may take a core sample: a small cut through the covering and insulation to see what is underneath and whether the deck is sound. The opening is sealed again with compatible material before we leave.
Condensation can also look like a leak, especially in older cold roofs without adequate ventilation, and the survey considers that possibility too. The flat roof leaks guide explains the common causes.
How long does a flat roof survey take and how long is it valid?
A survey of a typical garage or extension roof usually takes an hour or two on site. Larger, higher or multi-area roofs take longer, and the written report follows afterwards.
A survey describes the roof on the day it was inspected. It stays a useful baseline for planning, but roofs change, particularly older ones and after a hard winter or a storm. If you are using a report to plan a replacement some time later, or after a fresh leak, a short follow-up check is sensible. For roofs you manage over the long term, a regular inspection backed by the maintenance checklist picks up problems early.
Which towns in Greater Manchester do we cover?
- Manchester
- Oldham
- Wigan
- Bolton
- Stockport
- Salford
- Rochdale
- Sale
- Bury
- Altrincham
- Middleton
- Ashton-under-Lyne
- Leigh
- Stretford
- Urmston
- Eccles
- Tyldesley
- Hyde
- Walkden
- Prestwich
- Radcliffe
- Cheadle Hulme
- Heywood
- Denton
- Stalybridge
- Ashton in Makerfield
- Westhoughton
- Farnworth
- Saddleworth
- Hindley
- Golborne
- Droylsden
- Royton
- Failsworth
- Hazel Grove
- Irlam
- Horwich
- Bramhall
- Ramsbottom
- Bredbury
- Longsight
Flat roof surveys and leak tracing in Greater Manchester: questions
Which towns in Greater Manchester do you cover?
All of Greater Manchester. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a flat roof survey cost in Greater Manchester?
£140–£290 for a condition survey and leak investigation, at North West guide rates including VAT. We confirm the price once we've traced the leak or seen the damage.
Which council handles building control for a flat roof in Greater Manchester?
It depends on where the roof is: in Greater Manchester that's Manchester City Council, Oldham Council, Wigan Council and 7 other councils. Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. We confirm which applies at the survey.
Is a core sample damaging to the roof?
It's a small, deliberate opening that is sealed again with compatible material before we leave. It shouldn't affect how the roof performs.
Can a survey tell how old my flat roof is?
Only approximately. The type of covering and its condition give a reasonable estimate, but paperwork such as an invoice or guarantee is the only reliable record.
Do you survey commercial and block roofs?
Yes. We survey flat roofs on shops, offices, units, blocks of flats and HMOs, with the report structured so a landlord, managing agent or owner can plan and budget the work.
Everything about flat roof surveys and leak tracing → · All flat roofing in Greater Manchester →
