Llandudno at a glance
- Postcode districts
- LL30
- Population
- about 15,371 (GeoNames)
- Council area
- Conwy County Borough Council
- Building approval
- Conwy County Borough Council building control, or a registered building control approver
- Nearest main town
- Colwyn Bay, about 5 miles
- Guide price region
- Wales (−8% on West Midlands rates)
What do block and HMO roofs in Llandudno need?
A block roof in Llandudno is a long-term asset, so we talk about whole-life cost as well as the price today. A longer-life system with corrected falls can mean fewer reactive repairs and fewer rounds of consultation over the years, and the survey explains the options in plain terms.
In and around Llandudno, flat roofs are typically found on newer estates where the first extension roofs are now being replaced, and on 1930s semis with flat-roofed garages and kitchen extensions. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a block or HMO roof cost in Llandudno?
At Wales guide rates, a 150 m² block-of-flats roof in felt with insulation and scaffold comes to £14,300–£25,000 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Block of flats (150 m²), felt + insulation + scaffold | £14,300–£25,000 |
| Commercial roof (100 m²), single-ply + insulation | £12,150–£20,050 |
How do you manage access and residents during the work?
We agree an access and communication plan with the agent or freeholder before the scaffold goes up, so residents know what is happening and when.
That usually covers notices in the common parts and letters to each flat, scaffold and skip positions, keeping entrances, escape routes and bin stores clear, working hours, securing the scaffold out of hours, and a named contact for questions. If we need to look at a ceiling inside a top-floor flat, we arrange access through the agent or landlord.
Occupied blocks are re-roofed in phases, with each section watertight before the team leaves site, which also lets a larger roof be spread over more than one service charge year. Hot works near windows, vents and escape routes are tightly controlled, or avoided altogether with cold-applied systems.
What's included?
- Resident notices, access planning and phased work
- Quotes laid out to support leaseholder consultation
- Long-life systems: mastic asphalt, EPDM, single-ply and built-up felt
- Building control and insulation upgrades handled where needed
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
- Colwyn Bay · 5 mi
- Abergele · 11 mi
- Rhyl · 14 mi
- Bangor, Gwynedd · 14 mi
- Prestatyn · 18 mi
- Denbigh · 20 mi
Flats, HMOs and block roofs in Llandudno: questions
Do you cover Llandudno?
Yes. Llandudno is part of our Conwy coverage, including postcode districts LL30. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Llandudno?
Where the work needs approval it goes to Conwy County Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a block or HMO roof cost in Llandudno?
£14,300–£25,000 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can you quote for more than one roofing system?
Yes. We can price two or more systems on the same scope, for example built-up felt and single-ply, so leaseholders and the freeholder can compare cost against expected service life.
Does a block roof replacement need building control?
Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.