Fulwood at a glance
- Postcode districts
- S10
- Population
- about 18,233 (GeoNames)
- Council area
- Sheffield City Council
- Building approval
- Sheffield City Council building control, or a registered building control approver
- Nearest main town
- Sheffield, about 4 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
What do block and HMO roofs in Fulwood need?
Service charge budgets for blocks in Fulwood do not always stretch to a whole roof at once. We can phase a re-roof over more than one budget year, pricing each phase separately in writing and keeping every section watertight in between, so the building stays protected while the cost is spread.
Around Fulwood, flat roofs are common on low-rise post-war blocks of flats and on newer estates where the first extension roofs are now being replaced. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.
How much does a block or HMO roof cost in Fulwood?
For Fulwood we use Yorkshire and the Humber rates: £14,750–£25,850 is the guide for a 150 m² block-of-flats roof in felt with insulation and scaffold, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Block of flats (150 m²), felt + insulation + scaffold | £14,750–£25,850 |
| Commercial roof (100 m²), single-ply + insulation | £12,550–£20,700 |
Which roofing systems last longest on a block of flats?
Mastic asphalt, EPDM, single-ply and high-performance built-up felt all give long service lives on block roofs; the right choice depends on the deck, how the roof is used, the details and the whole-life cost.
- Mastic asphalt: 30–60 years with maintenance, common on concrete-decked blocks and walkways. See mastic asphalt roofing.
- EPDM: 25–50 years, laid in large sheets with few joins.
- Single-ply: 25–35+ years, quick to lay on larger roofs, with welded laps. See single-ply roofing.
- Built-up felt: 15–25 years for modern torch-on systems and longer for high-performance systems, robust where maintenance teams walk the roof.
- Liquid-applied: 10–25+ years by product, useful as an overlay on a sound roof with complex details.
The cheapest roof today is not always the cheapest over the life of the building. A longer-life system, with tapered insulation to cure ponding, can mean fewer reactive repairs and fewer rounds of consultation. These lives are indicative and assume good specification and regular maintenance.
What's included?
- Long-life systems: mastic asphalt, EPDM, single-ply and built-up felt
- Free survey and fixed, itemised written quote
- Building control and insulation upgrades handled where needed
- Written workmanship guarantee, with manufacturer guarantees registered where the system allows
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Nether Edge · 3 mi
- Sheffield · 4 mi
- Dronfield · 5 mi
- Chapeltown · 9 mi
- Chesterfield · 9 mi
- Rotherham · 10 mi
Flats, HMOs and block roofs in Fulwood: questions
Do you cover Fulwood?
Yes. Fulwood is part of our South Yorkshire coverage, including postcode districts S10. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Fulwood?
Where the work needs approval it goes to Sheffield City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a block or HMO roof cost in Fulwood?
£14,750–£25,850 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Does a block roof replacement need building control?
Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.
What if a top-floor flat is leaking before the roof is replaced?
We can attend for emergency temporary weatherproofing as soon as a team is available, guide £170–£430. That protects the flat while the permanent work is agreed.