Flat RoofingContractors

Commercial and blocks

Flats, HMOs and block roofs in Kenilworth

We quote for flat roofs over flats in Kenilworth, from small converted houses to purpose-built blocks with stair cores, lift rooms and bin stores. Building control is handled where the roof needs an insulation upgrade, and every re-roof comes with a written workmanship guarantee, with its length set out in the quote.

1960s block of flats with scaffold and edge protection while its flat roof is replacedComputer-generated example image

Kenilworth at a glance

Postcode districts
CV8
Population
about 22,413 (GeoNames)
Council area
Warwick District Council
Building approval
Warwick District Council building control, or a registered building control approver
Nearest main town
Coventry, about 5 miles
Guide price region
West Midlands (baseline rates)

What do block and HMO roofs in Kenilworth need?

Fire performance matters near boundaries and on occupied buildings in Kenilworth. We check the external fire classification of the whole roof build-up, not just the membrane, control or avoid hot works near escape routes and windows, and keep fire-stopping details intact where the roof crosses a separating wall.

In a town like Kenilworth, flat roofs are commonly found on 1930s semis with flat-roofed garages and kitchen extensions or shops with flat-roofed rear stores below flats. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.

How much does a block or HMO roof cost in Kenilworth?

Guide price in Kenilworth: £15,550–£27,200 for a 150 m² block-of-flats roof in felt with insulation and scaffold, including VAT at West Midlands rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Block of flats (150 m²), felt + insulation + scaffold£15,550–£27,200
Commercial roof (100 m²), single-ply + insulation£13,250–£21,800

Which roofing systems last longest on a block of flats?

Mastic asphalt, EPDM, single-ply and high-performance built-up felt all give long service lives on block roofs; the right choice depends on the deck, how the roof is used, the details and the whole-life cost.

  • Mastic asphalt: 30–60 years with maintenance, common on concrete-decked blocks and walkways. See mastic asphalt roofing.
  • EPDM: 25–50 years, laid in large sheets with few joins.
  • Single-ply: 25–35+ years, quick to lay on larger roofs, with welded laps. See single-ply roofing.
  • Built-up felt: 15–25 years for modern torch-on systems and longer for high-performance systems, robust where maintenance teams walk the roof.
  • Liquid-applied: 10–25+ years by product, useful as an overlay on a sound roof with complex details.

The cheapest roof today is not always the cheapest over the life of the building. A longer-life system, with tapered insulation to cure ponding, can mean fewer reactive repairs and fewer rounds of consultation. These lives are indicative and assume good specification and regular maintenance.

What's included?

  • Written workmanship guarantee, with manufacturer guarantees registered where the system allows
  • Long-life systems: mastic asphalt, EPDM, single-ply and built-up felt
  • Resident notices, access planning and phased work
  • Building control and insulation upgrades handled where needed

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Flats, HMOs and block roofs in Kenilworth: questions

Do you cover Kenilworth?

Yes. Kenilworth is part of our Warwickshire coverage, including postcode districts CV8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Kenilworth?

Where the work needs approval it goes to Warwick District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a block or HMO roof cost in Kenilworth?

£15,550–£27,200 for a 150 m² block-of-flats roof in felt with insulation and scaffold, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Does a block roof replacement need building control?

Usually, yes. Re-covering more than half of a roof over heated flats normally triggers the thermal element rules, which bring insulation and approval requirements, and we handle building control or building standards where it is needed.

Can you quote for more than one roofing system?

Yes. We can price two or more systems on the same scope, for example built-up felt and single-ply, so leaseholders and the freeholder can compare cost against expected service life.

Other flat roof work in Kenilworth

Flats, HMOs and block roofs in Kenilworth: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price