Bargoed at a glance
- Postcode districts
- CF81
- Population
- about 13,412 (GeoNames)
- Council area
- Caerphilly County Borough Council
- Building approval
- Caerphilly County Borough Council building control, or a registered building control approver
- Nearest main town
- Ebbw Vale, about 7 miles
- Guide price region
- Wales (−8% on West Midlands rates)
When does a garage roof in Bargoed need replacing?
Water from a failing garage roof in Bargoed does not always stay in the garage. On an attached garage it can run down the house wall or track under the flashing, and a blocked or broken gutter can spill onto the drive or a neighbour's property. Replacing the roof deals with the source.
In a town like Bargoed, flat roofs are commonly found on shops with flat-roofed rear stores below flats or low-rise post-war blocks of flats. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a new garage roof cost in Bargoed?
At Wales guide rates, a typical 18 m² garage roof in EPDM comes to £1,450–£2,600 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), EPDM rubber | £1,450–£2,600 |
| Single garage (18 m²), torch-on felt | £1,400–£2,400 |
| Single garage (18 m²), GRP fibreglass | £1,650–£3,000 |
| Extension (20 m²), GRP, new deck + insulation | £2,750–£4,950 |
Which roofing system is best for a garage?
For most single garages, EPDM rubber is a strong choice, because a simple rectangle can usually be covered in one sheet with no joins in the field of the roof. It is light, flexible and quick to lay.
GRP fibreglass suits garages with integral box gutters, several corners or a roof that is walked on to reach windows or clean gutters. Torch-on felt remains a cost-effective, durable option, particularly on larger lock-up runs where budget matters. Where a garage adjoins timber or other combustible material, we also consider whether a torch-free system is the safer method, such as EPDM, GRP or a liquid-applied coating.
If you plan to convert the garage later, say so at survey. A roof built as a warm roof now saves stripping it again when the room is heated.
What's included?
- Free survey of the deck, fall and gutter line
- Written workmanship guarantee, with material guarantees registered where available
- Gutter or outlet renewed where the old one has failed
- New membrane dressed into fresh edge and drip trims
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
Garage roofs in Bargoed: questions
Do you cover Bargoed?
Yes. Bargoed is part of our Caerphilly coverage, including postcode districts CF81. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Bargoed?
Where the work needs approval it goes to Caerphilly County Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a new garage roof cost in Bargoed?
£1,450–£2,600 for a typical 18 m² garage roof in EPDM, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Should I insulate my garage roof?
Only if the garage is heated or you plan to use it as a room. Insulating a cold, unheated garage roof can cause condensation unless it is designed carefully, so we advise case by case.
How long does a garage roof last?
It depends on the system. As indicative figures, EPDM lasts 25–50 years, GRP 20–40 and modern torch-on felt 15–25, with good specification and maintenance.