Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Kempston

Our GRP service in Kempston covers full replacement of tired felt and failed fibreglass roofs, as well as new roofs on extensions. Every job includes deck checks, careful joint reinforcement and a UV-stable topcoat, with a written workmanship guarantee on every re-roof and manufacturer guarantees registered where the system allows.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Kempston at a glance

Postcode districts
MK42
Population
about 19,873 (GeoNames)
Council area
Bedford Borough Council
Building approval
Bedford Borough Council building control, or a registered building control approver
Nearest main town
Bedford, about 2 miles
Guide price region
East of England (+5% on West Midlands rates)

Why choose GRP fibreglass roofing in Kempston?

Some Kempston homeowners pick GRP for appearance alone. The topcoat comes in several colours, the trims are moulded to match, and the finished roof looks tidy from upstairs windows. With good laying conditions and a sound deck, a GRP roof typically lasts 20 years or more.

Around Kempston, flat roofs are common on newer estates where the first extension roofs are now being replaced and on lock-up garage blocks on estates. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.

How much does a GRP fibreglass roof cost in Kempston?

For Kempston we use East of England rates: £3,150–£5,650 is the guide for a 20 m² extension roof in GRP with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£3,150–£5,650
Dormer (8 m²), GRP, scaffold£1,450–£2,800
Single garage (18 m²), GRP fibreglass£1,850–£3,400
Single garage (18 m²), EPDM rubber£1,700–£2,950
Extension (20 m²), EPDM, new deck + insulation£2,950–£5,150

Why do GRP roofs crack, and can weather affect the installation?

GRP usually cracks where the structure moves and the laminate cannot, typically along board joints, at the junction with trims, or where a roof meets a wall. Weather during laying is the other big factor, because resin cures by chemical reaction and that reaction is sensitive to temperature and moisture.

How we reduce the risk of cracking:

  • boards fixed at close centres so the deck does not flex;
  • joints taped and reinforced with an extra strip of mat;
  • wall junctions finished with a separate trim or flashing, not laminated hard into the masonry;
  • roofs over a certain size divided with movement details where the system calls for them.

And how weather is managed:

  • no laminating in rain, on a damp deck, or when dew or frost is likely before the resin sets;
  • catalyst levels adjusted for the temperature, so resin neither stays tacky on a cold day nor kicks too fast in summer heat;
  • the roof sheeted over if a shower threatens a fresh laminate.

That is why a GRP date can move at short notice. A day's delay costs far less than a laminate that never cures properly.

What's included?

  • Moulded GRP trims, kerbs and upstands
  • Resin and glass-mat laminate with taped and reinforced joints
  • Removal of the old covering and disposal of waste
  • Coloured UV-stable topcoat, with anti-slip finish on request

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Kempston: questions

Do you cover Kempston?

Yes. Kempston is part of our Bedfordshire coverage, including postcode districts MK42. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Kempston?

Where the work needs approval it goes to Bedford Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Kempston?

£3,150–£5,650 for a 20 m² extension roof in GRP with a new deck and insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

What colours does a GRP roof come in?

Topcoats are typically available in greys, greens, black and some other shades. Lighter colours absorb less heat, and an anti-slip finish can be added where people will walk on the roof.

Can you walk on a GRP roof?

Yes, a correctly laid GRP roof takes occasional foot traffic, such as cleaning windows or maintaining plant. For a regular walkway or terrace, an anti-slip topcoat and a suitable specification are needed.

Other flat roof work in Kempston

GRP fibreglass roofing in Kempston: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price