GRP fibreglass roofing across Cheshire

Price per m²

£71–£133

Typical life

20–40 years

Manufacturer guarantees

20–25 year material warranties on specified systems

Typical garage roof

£1,700–£3,100

How much does a GRP fibreglass roof cost in Cheshire?

Guide prices including VAT at North West rates. The fixed price comes after a free survey for new and replacement roofs.

Which flat roofs are common in Cheshire?

Flat roofs in Cheshire sit on terraced streets with flat-roofed rear kitchens and bathrooms, 1960s and 1970s link-detached houses with flat-roofed garages and porches and lock-up garage blocks on estates. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Cheshire the application goes to Warrington Borough Council, Cheshire West and Chester Council, Cheshire East Council and 1 other council. More on the rules.

Will a new GRP roof need extra insulation to meet building regulations?

If the roof is over a heated room and you are replacing more than half of it, usually yes. In England, Wales and Northern Ireland that counts as renovating a thermal element, and in Scotland the council's building standards service will say whether a building warrant applies.

GRP pairs well with a warm roof because the new deck boards it needs can sit on top of the insulation. The result is thicker, so we check at survey that there is room under door cills and wall flashings, and that the upstands can finish around 150 mm above the new surface. Where approval is needed we arrange it with building control or building standards.

Unheated, detached garages normally sit outside the thermal rules. See the building regulations page for each nation, or the warm vs cold roof guide for why we avoid cold roofs where we can.

Is GRP better than EPDM, felt or a liquid roof?

GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.

Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.

Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.

For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.

Which towns in Cheshire do we cover?

• Warrington
• Chester
• Crewe
• Ellesmere Port
• Widnes
• Macclesfield
• Northwich
• Great Sankey
• Winsford
• Congleton
• Wilmslow
• Sandbach
• Nantwich
• Neston

Everything about GRP fibreglass roofing → · All flat roofing in Cheshire →