Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Stevenage

For a fibreglass flat roof in Stevenage, the price depends on size, access, the new deck and any insulation needed. You can get a guide figure from our online tool in a couple of minutes. After a free survey, we confirm a fixed price in writing and agree a start date that leaves room for the weather.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Stevenage at a glance

Postcode districts
SG1, SG2
Population
about 91,774 (GeoNames)
Council area
Stevenage Borough Council
Building approval
Stevenage Borough Council building control, or a registered building control approver
Nearest main town
Luton, about 9 miles
Guide price region
East of England (+5% on West Midlands rates)

Why choose GRP fibreglass roofing in Stevenage?

GRP is a good choice in Stevenage when the roof will be seen or used: a dormer visible from the street, an extension overlooked by upstairs windows, or a roof that needs access for cleaning or maintenance. The hard, jointless finish and moulded trims give a neat result that copes with occasional foot traffic.

Around Stevenage, flat roofs are common on bungalows with flat-roofed side extensions and dormers and on terraced streets with flat-roofed rear kitchens and bathrooms. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.

How much does a GRP fibreglass roof cost in Stevenage?

At East of England guide rates, a 20 m² extension roof in GRP with a new deck and insulation comes to £3,150–£5,650 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£3,150–£5,650
Dormer (8 m²), GRP, scaffold£1,450–£2,800
Single garage (18 m²), GRP fibreglass£1,850–£3,400
Single garage (18 m²), EPDM rubber£1,700–£2,950
Extension (20 m²), EPDM, new deck + insulation£2,950–£5,150

Is GRP better than EPDM, felt or a liquid roof?

GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.

Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.

Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.

For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.

What's included?

  • Removal of the old covering and disposal of waste
  • Moulded GRP trims, kerbs and upstands
  • Warm-roof insulation and vapour control layer where the room below is heated
  • Coloured UV-stable topcoat, with anti-slip finish on request

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Stevenage: questions

Do you cover Stevenage?

Yes. Stevenage is part of our Hertfordshire coverage, including postcode districts SG1, SG2. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Stevenage?

Where the work needs approval it goes to Stevenage Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Stevenage?

£3,150–£5,650 for a 20 m² extension roof in GRP with a new deck and insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

How long before a new GRP roof is fully cured?

The topcoat is usually touch-dry within hours in reasonable weather, but full cure takes longer in cold conditions. We advise keeping off the roof until the team confirms it is ready.

Can GRP be laid over an existing felt roof?

Generally no. GRP needs a clean, dry, rigid timber deck, so the old felt is usually stripped and the boards replaced before laminating.

Other flat roof work in Stevenage

GRP fibreglass roofing in Stevenage: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price