Sittingbourne at a glance
- Postcode districts
- ME9, ME10, ME12
- Population
- about 54,392 (GeoNames)
- Council area
- Swale Borough Council
- Building approval
- Swale Borough Council building control, or a registered building control approver
- Nearest main town
- Gillingham, about 9 miles
- Guide price region
- South East (+10% on West Midlands rates)
Why choose GRP fibreglass roofing in Sittingbourne?
Landlords and small businesses in Sittingbourne often favour GRP on roofs that contractors need to access for plant, aerials or gutter clearance. The surface resists scuffs better than a soft membrane, and small damage can usually be ground back and re-laminated without disturbing the rest of the roof.
Sittingbourne's flat roofs are mostly on bungalows with flat-roofed side extensions and dormers, with plenty on terraced streets with flat-roofed rear kitchens and bathrooms too. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.
How much does a GRP fibreglass roof cost in Sittingbourne?
At South East guide rates, a 20 m² extension roof in GRP with a new deck and insulation comes to £3,300–£5,900 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), GRP, new deck + insulation | £3,300–£5,900 |
| Dormer (8 m²), GRP, scaffold | £1,550–£2,900 |
| Single garage (18 m²), GRP fibreglass | £1,950–£3,600 |
| Single garage (18 m²), EPDM rubber | £1,750–£3,100 |
| Extension (20 m²), EPDM, new deck + insulation | £3,100–£5,350 |
Is GRP better than EPDM, felt or a liquid roof?
GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.
Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.
Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.
For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.
What's included?
- Warm-roof insulation and vapour control layer where the room below is heated
- Removal of the old covering and disposal of waste
- Resin and glass-mat laminate with taped and reinforced joints
- New OSB3 or plywood deck, fixed at close centres
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
GRP fibreglass roofing in Sittingbourne: questions
Do you cover Sittingbourne?
Yes. Sittingbourne is part of our Kent coverage, including postcode districts ME9, ME10, ME12. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Sittingbourne?
Where the work needs approval it goes to Swale Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a GRP fibreglass roof cost in Sittingbourne?
£3,300–£5,900 for a 20 m² extension roof in GRP with a new deck and insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Does GRP smell when it is being laid?
Yes, the resin gives off a strong styrene smell while it cures. It usually fades within a day or so, and we advise keeping nearby windows closed while the team works.
Is GRP suitable for a dormer roof?
Yes, GRP is commonly used on dormers because the trims can be moulded neatly and the finish looks tidy from the ground. Scaffold is normally needed, which we include in the quote.