Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Islington

Thinking about a GRP roof for a dormer or extension in Islington? The finish is rigid and tidy, with trims moulded into the roof rather than glued on. It does need a dry day and a new deck, so we survey first, explain what is involved and give you a fixed written quote with no obligation.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Islington at a glance

Postcode districts
N1, N5, N7, EC1V, EC1R, EC1, EC1Y, EC1M and 3 more
Council area
London Borough of Islington
Building approval
London Borough of Islington building control, or a registered building control approver
Guide price region
London (+20% on West Midlands rates)

Why choose GRP fibreglass roofing in Islington?

GRP is a good choice in Islington when the roof will be seen or used: a dormer visible from the street, an extension overlooked by upstairs windows, or a roof that needs access for cleaning or maintenance. The hard, jointless finish and moulded trims give a neat result that copes with occasional foot traffic.

In and around Islington, flat roofs are typically found on shops with flat-roofed stores below flats above, and on mansard and dormer loft conversions. The Thames basin is one of the drier parts of Britain at roughly 730 mm of rain a year, but summer heat is the bigger test here: dark membranes on south-facing roofs swing a long way in temperature.

How much does a GRP fibreglass roof cost in Islington?

For Islington we use London rates: £3,600–£6,450 is the guide for a 20 m² extension roof in GRP with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£3,600–£6,450
Dormer (8 m²), GRP, scaffold£1,700–£3,200
Single garage (18 m²), GRP fibreglass£2,150–£3,900
Single garage (18 m²), EPDM rubber£1,900–£3,350
Extension (20 m²), EPDM, new deck + insulation£3,350–£5,850

Why do GRP roofs crack, and can weather affect the installation?

GRP usually cracks where the structure moves and the laminate cannot, typically along board joints, at the junction with trims, or where a roof meets a wall. Weather during laying is the other big factor, because resin cures by chemical reaction and that reaction is sensitive to temperature and moisture.

How we reduce the risk of cracking:

  • boards fixed at close centres so the deck does not flex;
  • joints taped and reinforced with an extra strip of mat;
  • wall junctions finished with a separate trim or flashing, not laminated hard into the masonry;
  • roofs over a certain size divided with movement details where the system calls for them.

And how weather is managed:

  • no laminating in rain, on a damp deck, or when dew or frost is likely before the resin sets;
  • catalyst levels adjusted for the temperature, so resin neither stays tacky on a cold day nor kicks too fast in summer heat;
  • the roof sheeted over if a shower threatens a fresh laminate.

That is why a GRP date can move at short notice. A day's delay costs far less than a laminate that never cures properly.

What's included?

  • Resin and glass-mat laminate with taped and reinforced joints
  • New OSB3 or plywood deck, fixed at close centres
  • Coloured UV-stable topcoat, with anti-slip finish on request
  • Moulded GRP trims, kerbs and upstands

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Islington: questions

Do you cover Islington?

Yes. Islington is part of our London coverage, including postcode districts N1, N5, N7, EC1V, EC1R, EC1 and 5 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Islington?

Where the work needs approval it goes to London Borough of Islington building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Islington?

£3,600–£6,450 for a 20 m² extension roof in GRP with a new deck and insulation, at London guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can you walk on a GRP roof?

Yes, a correctly laid GRP roof takes occasional foot traffic, such as cleaning windows or maintaining plant. For a regular walkway or terrace, an anti-slip topcoat and a suitable specification are needed.

Does GRP smell when it is being laid?

Yes, the resin gives off a strong styrene smell while it cures. It usually fades within a day or so, and we advise keeping nearby windows closed while the team works.

Other flat roof work in Islington

GRP fibreglass roofing in Islington: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price