Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Kirkby

Our GRP service in Kirkby covers full replacement of tired felt and failed fibreglass roofs, as well as new roofs on extensions. Every job includes deck checks, careful joint reinforcement and a UV-stable topcoat, with a written workmanship guarantee on every re-roof and manufacturer guarantees registered where the system allows.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Kirkby at a glance

Postcode districts
L32, L33
Population
about 45,564 (GeoNames)
Council area
Knowsley Council
Building approval
Knowsley Council building control, or a registered building control approver
Nearest main town
Liverpool, about 6 miles
Guide price region
North West (−5% on West Midlands rates)

Why choose GRP fibreglass roofing in Kirkby?

GRP is a good fit in Kirkby for roofs with awkward shapes, short runs of upstand and lots of corners, because every detail is laminated in place rather than cut and glued. Where a sheet membrane would need many joins, fibreglass forms one continuous skin across the whole roof.

In and around Kirkby, flat roofs are typically found on terraced streets with flat-roofed rear kitchens and bathrooms, and on lock-up garage blocks on estates. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour.

How much does a GRP fibreglass roof cost in Kirkby?

At North West guide rates, a 20 m² extension roof in GRP with a new deck and insulation comes to £2,850–£5,100 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£2,850–£5,100
Dormer (8 m²), GRP, scaffold£1,350–£2,500
Single garage (18 m²), GRP fibreglass£1,700–£3,100
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Is GRP better than EPDM, felt or a liquid roof?

GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.

Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.

Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.

For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.

What's included?

  • Resin and glass-mat laminate with taped and reinforced joints
  • Coloured UV-stable topcoat, with anti-slip finish on request
  • Removal of the old covering and disposal of waste
  • Warm-roof insulation and vapour control layer where the room below is heated

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Kirkby: questions

Do you cover Kirkby?

Yes. Kirkby is part of our Merseyside coverage, including postcode districts L32, L33. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Kirkby?

Where the work needs approval it goes to Knowsley Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Kirkby?

£2,850–£5,100 for a 20 m² extension roof in GRP with a new deck and insulation, at North West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can you walk on a GRP roof?

Yes, a correctly laid GRP roof takes occasional foot traffic, such as cleaning windows or maintaining plant. For a regular walkway or terrace, an anti-slip topcoat and a suitable specification are needed.

Does GRP smell when it is being laid?

Yes, the resin gives off a strong styrene smell while it cures. It usually fades within a day or so, and we advise keeping nearby windows closed while the team works.

Other flat roof work in Kirkby

GRP fibreglass roofing in Kirkby: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price