Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Yarm

Fibreglass roofing in Yarm: a new timber deck, moulded trims, a resin and glass-mat laminate and a coloured topcoat, built up on the roof to form one hard skin. We strip the old covering, add insulation where the room below is heated, and plan laminating around the weather so the resin cures properly.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Yarm at a glance

Postcode districts
TS15
Population
about 19,184 (GeoNames)
Council area
Stockton-on-Tees Borough Council
Building approval
Stockton-on-Tees Borough Council building control, or a registered building control approver
Nearest main town
Stockton-on-Tees, about 5 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

Why choose GRP fibreglass roofing in Yarm?

Landlords and small businesses in Yarm often favour GRP on roofs that contractors need to access for plant, aerials or gutter clearance. The surface resists scuffs better than a soft membrane, and small damage can usually be ground back and re-laminated without disturbing the rest of the roof.

Around Yarm, flat roofs are common on newer estates where the first extension roofs are now being replaced and on shops with flat-roofed rear stores below flats. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does a GRP fibreglass roof cost in Yarm?

At Yorkshire and the Humber guide rates, a 20 m² extension roof in GRP with a new deck and insulation comes to £2,850–£5,100 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£2,850–£5,100
Dormer (8 m²), GRP, scaffold£1,350–£2,500
Single garage (18 m²), GRP fibreglass£1,700–£3,100
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Why do GRP roofs crack, and can weather affect the installation?

GRP usually cracks where the structure moves and the laminate cannot, typically along board joints, at the junction with trims, or where a roof meets a wall. Weather during laying is the other big factor, because resin cures by chemical reaction and that reaction is sensitive to temperature and moisture.

How we reduce the risk of cracking:

  • boards fixed at close centres so the deck does not flex;
  • joints taped and reinforced with an extra strip of mat;
  • wall junctions finished with a separate trim or flashing, not laminated hard into the masonry;
  • roofs over a certain size divided with movement details where the system calls for them.

And how weather is managed:

  • no laminating in rain, on a damp deck, or when dew or frost is likely before the resin sets;
  • catalyst levels adjusted for the temperature, so resin neither stays tacky on a cold day nor kicks too fast in summer heat;
  • the roof sheeted over if a shower threatens a fresh laminate.

That is why a GRP date can move at short notice. A day's delay costs far less than a laminate that never cures properly.

What's included?

  • Moulded GRP trims, kerbs and upstands
  • Resin and glass-mat laminate with taped and reinforced joints
  • Removal of the old covering and disposal of waste
  • Warm-roof insulation and vapour control layer where the room below is heated

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Yarm: questions

Do you cover Yarm?

Yes. Yarm is part of our North Yorkshire coverage, including postcode districts TS15. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Yarm?

Where the work needs approval it goes to Stockton-on-Tees Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Yarm?

£2,850–£5,100 for a 20 m² extension roof in GRP with a new deck and insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can a cracked GRP roof be repaired?

Often, yes. The area is ground back, cleaned and re-laminated with fresh mat and topcoat. If cracks keep returning along joints, the deck or detailing usually needs attention rather than another patch.

What colours does a GRP roof come in?

Topcoats are typically available in greys, greens, black and some other shades. Lighter colours absorb less heat, and an anti-slip finish can be added where people will walk on the roof.

Other flat roof work in Yarm

GRP fibreglass roofing in Yarm: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price