- Price per m²
- £71–£133
- Typical life
- 20–40 years
- Manufacturer guarantees
- 20–25 year material warranties on specified systems
- Typical garage roof
- £1,700–£3,100
Perth and Kinross at a glance
- Largest towns
- Perth, Blairgowrie and Rattray, Crieff
- Postcode areas
- PH
- Building standards
- Perth and Kinross Council
- Neighbouring areas
- Dundee City · Fife · Clackmannanshire · Stirling
- Guide price region
- Scotland (−5% on West Midlands rates)
How much does a GRP fibreglass roof cost in Perth and Kinross?
Guide prices including VAT at Scotland rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), GRP, new deck + insulation | £2,850–£5,100 |
| Dormer (8 m²), GRP, scaffold | £1,350–£2,500 |
| Single garage (18 m²), GRP fibreglass | £1,700–£3,100 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
Which flat roofs are common in Perth and Kinross?
Flat roofs in Perth and Kinross sit on lock-up garage blocks on estates, terraced streets with flat-roofed rear kitchens and bathrooms and low-rise post-war blocks of flats. Scotland averages roughly 1,570 mm of rain a year, with the west far wetter than the east, so drainage, falls and wind uplift are part of every specification we write. Approximate 1991–2020 regional averages based on Met Office data.
Building standards in Scotland
In Scotland a building warrant is usually needed for alterations, structural work and new roofs; like-for-like repairs to a covering can be exempt. Section 6 of the technical handbooks sets a domestic roof benchmark of 0.12 W/m²K, applied as far as reasonably practicable on an existing roof. In Perth and Kinross the application goes to Perth and Kinross Council (building standards). More on the rules.
Is GRP better than EPDM, felt or a liquid roof?
GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.
Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.
Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.
For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.
Which towns in Perth and Kinross do we cover?
GRP fibreglass roofing in Perth and Kinross: questions
Which towns in Perth and Kinross do you cover?
All of Perth and Kinross. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a GRP fibreglass roof cost in Perth and Kinross?
£2,850–£5,100 for a 20 m² extension roof in GRP with a new deck and insulation, at Scotland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Which council handles building standards for a flat roof in Perth and Kinross?
It depends on where the roof is: in Perth and Kinross that's Perth and Kinross Council. In Scotland a building warrant is usually needed for alterations, structural work and new roofs; like-for-like repairs to a covering can be exempt. We confirm which applies at the survey.
What colours does a GRP roof come in?
Topcoats are typically available in greys, greens, black and some other shades. Lighter colours absorb less heat, and an anti-slip finish can be added where people will walk on the roof.
Is GRP suitable for a dormer roof?
Yes, GRP is commonly used on dormers because the trims can be moulded neatly and the finish looks tidy from the ground. Scaffold is normally needed, which we include in the quote.
Does GRP smell when it is being laid?
Yes, the resin gives off a strong styrene smell while it cures. It usually fades within a day or so, and we advise keeping nearby windows closed while the team works.
Everything about GRP fibreglass roofing → · All flat roofing in Perth and Kinross →