Flat RoofingContractors

Flat roof systems

GRP fibreglass roofing in Cleckheaton

We lay GRP fibreglass roofs in Cleckheaton on dormers, extensions, garages and small commercial buildings. A surveyor visits first, free of charge, to check the joists, measure up and see whether the roof suits fibreglass. You then get a fixed written price, and the work is done by vetted roofing teams working under S&K.

Finished grey GRP fibreglass flat roof with moulded trims on a single-storey extensionComputer-generated example image

Cleckheaton at a glance

Postcode districts
BD19
Population
about 27,393 (GeoNames)
Council area
Kirklees Council
Building approval
Kirklees Council building control, or a registered building control approver
Nearest main town
Bradford, about 5 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

Why choose GRP fibreglass roofing in Cleckheaton?

Some Cleckheaton homeowners pick GRP for appearance alone. The topcoat comes in several colours, the trims are moulded to match, and the finished roof looks tidy from upstairs windows. With good laying conditions and a sound deck, a GRP roof typically lasts 20 years or more.

In a town like Cleckheaton, flat roofs are commonly found on terraced streets with flat-roofed rear kitchens and bathrooms or shops with flat-roofed rear stores below flats. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does a GRP fibreglass roof cost in Cleckheaton?

For Cleckheaton we use Yorkshire and the Humber rates: £2,850–£5,100 is the guide for a 20 m² extension roof in GRP with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Extension (20 m²), GRP, new deck + insulation£2,850–£5,100
Dormer (8 m²), GRP, scaffold£1,350–£2,500
Single garage (18 m²), GRP fibreglass£1,700–£3,100
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Is GRP better than EPDM, felt or a liquid roof?

GRP is the better choice when you want a rigid, walkable finish, a neat look on a visible roof, or crisp moulded details on a complicated shape. It is not automatically better on a plain garage that nobody steps on.

Strengths: hard surface that takes occasional foot traffic; jointless finish with no laps; trims, kerbs and upstands moulded as part of the roof; choice of topcoat colours; small repairs can be laminated in.

Weaknesses: sensitive to weather while laying; rigid, so it can crack where the structure moves; usually needs a new deck; styrene smell during application; skill-dependent, so workmanship matters more than with sheet systems.

For a simple roof, EPDM rubber is often quicker to lay and more forgiving of movement. Torch-on felt is usually cheaper per square metre. A liquid-applied roof can go over a sound existing surface, larger commercial roofs tend to suit single-ply, and older buildings may already have mastic asphalt worth keeping. The EPDM vs GRP vs felt guide compares the three most common choices.

What's included?

  • Moulded GRP trims, kerbs and upstands
  • Coloured UV-stable topcoat, with anti-slip finish on request
  • Resin and glass-mat laminate with taped and reinforced joints
  • New OSB3 or plywood deck, fixed at close centres

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

GRP fibreglass roofing in Cleckheaton: questions

Do you cover Cleckheaton?

Yes. Cleckheaton is part of our West Yorkshire coverage, including postcode districts BD19. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Cleckheaton?

Where the work needs approval it goes to Kirklees Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a GRP fibreglass roof cost in Cleckheaton?

£2,850–£5,100 for a 20 m² extension roof in GRP with a new deck and insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Does GRP smell when it is being laid?

Yes, the resin gives off a strong styrene smell while it cures. It usually fades within a day or so, and we advise keeping nearby windows closed while the team works.

Is GRP suitable for a dormer roof?

Yes, GRP is commonly used on dormers because the trims can be moulded neatly and the finish looks tidy from the ground. Scaffold is normally needed, which we include in the quote.

Other flat roof work in Cleckheaton

GRP fibreglass roofing in Cleckheaton: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price