Nigg at a glance
- Postcode districts
- AB12
- Population
- about 16,400 (GeoNames)
- Council area
- Aberdeen City Council
- Building approval
- Aberdeen City Council building standards
- Nearest main town
- Aberdeen, about 2 miles
- Guide price region
- Scotland (−5% on West Midlands rates)
Why choose a liquid-applied roof in Nigg?
For businesses and landlords in Nigg, a cold-applied liquid roof means no flame on site and, with some systems, a short cure time. That can make it easier to work around occupied buildings, tenants and opening hours than a system that needs hot works or a long strip-out.
In and around Nigg, flat roofs are typically found on terraced streets with flat-roofed rear kitchens and bathrooms, and on newer estates where the first extension roofs are now being replaced. Scotland averages roughly 1,570 mm of rain a year, with the west far wetter than the east, so drainage, falls and wind uplift are part of every specification we write.
How much does a liquid-applied roof cost in Nigg?
Guide price in Nigg: £1,950–£3,100 for a typical 18 m² garage roof in a liquid-applied system, including VAT at Scotland rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), liquid-applied | £1,950–£3,100 |
| Balcony (12 m²), liquid-applied, scaffold | £1,800–£3,100 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
When is a liquid roof the best option, and when is it not?
A liquid roof is often the best option for roofs crowded with pipes, vents and upstands, for balconies and walkways, and for overlaying a structurally sound roof that is starting to fail. It is the wrong choice when the deck is rotten, the insulation is wet or the falls are badly wrong.
Advantages: continuous finish with no laps; forms details around pipes and odd shapes easily; cold-applied with no flame; can often go over felt, asphalt or concrete; some systems take foot traffic.
Disadvantages: higher cost per square metre than felt or EPDM; needs dry weather and careful thickness control; only as good as the surface it is bonded to; product quality varies widely across the market.
For a straightforward re-roof on a fresh deck, EPDM or GRP may offer better value. Larger flat areas suit torch-on felt or single-ply. On a sound mastic asphalt roof, a compatible liquid system can sometimes be applied over it. See also our guide to overlay or strip.
What's included?
- Fleece-reinforced liquid membrane applied to the specified thickness
- Detailing of upstands, outlets, pipes and corners before the main area
- Surface cleaning, repairs and removal of loose material
- Primer matched to the substrate
Building standards in Scotland
In Scotland the building standards technical handbooks (Section 6 for energy) apply, and the council's building standards service decides whether a building warrant is needed. Like-for-like repairs to a roof covering can be exempt; alterations, structural work and new roofs usually need a warrant before work starts. The domestic roof benchmark is 0.12 W/m²K, applied as far as reasonably practicable on an existing roof. More on the rules.
Which nearby areas do we also cover?
Liquid-applied roofing in Nigg: questions
Do you cover Nigg?
Yes. Nigg is part of our Aberdeen City coverage, including postcode districts AB12. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building standards for a flat roof in Nigg?
Where the work needs approval it goes to Aberdeen City Council building standards. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a liquid-applied roof cost in Nigg?
£1,950–£3,100 for a typical 18 m² garage roof in a liquid-applied system, at Scotland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Does a liquid roof smell when it is applied?
Some systems, particularly PMMA, have a strong odour during application, while many polyurethane and water-based products are milder. We tell you what to expect and plan around windows and vents.
Can liquid roofing stop a leak on a flat roof?
It can, if the leak is at a detail or the membrane is worn but the roof beneath is sound. If water has soaked the insulation or deck, coating over it will not cure the problem.