Warrenpoint at a glance
- Postcode districts
- BT34
- Population
- about 7,670 (GeoNames)
- Council area
- Newry, Mourne and Down District Council
- Building approval
- Newry, Mourne and Down District Council building control
- Guide price region
- Northern Ireland (−12% on West Midlands rates)
Why choose a liquid-applied roof in Warrenpoint?
For businesses and landlords in Warrenpoint, a cold-applied liquid roof means no flame on site and, with some systems, a short cure time. That can make it easier to work around occupied buildings, tenants and opening hours than a system that needs hot works or a long strip-out.
Warrenpoint's flat roofs are mostly on bungalows with flat-roofed side extensions and dormers, with plenty on terraced streets with flat-roofed rear kitchens and bathrooms too. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.
How much does a liquid-applied roof cost in Warrenpoint?
For Warrenpoint we use Northern Ireland rates: £1,800–£2,850 is the guide for a typical 18 m² garage roof in a liquid-applied system, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), liquid-applied | £1,800–£2,850 |
| Balcony (12 m²), liquid-applied, scaffold | £1,650–£2,850 |
| Single garage (18 m²), EPDM rubber | £1,400–£2,450 |
| Extension (20 m²), EPDM, new deck + insulation | £2,450–£4,300 |
Do building regulations apply if a liquid coating goes over my roof?
They can. In England, Wales and Northern Ireland, re-covering more than half of a roof over a heated room is usually renovation of a thermal element, even when the new membrane goes over the old, so the roof should be insulated towards the renovation standard where feasible; for a Scottish property, the local building standards team will confirm whether a warrant is required.
A minor coating repair to a small area is different from re-covering the whole roof. Where insulation is needed, an overlay is not always practical, because the insulation has to go under a new waterproof layer. In that case we may recommend stripping to the deck, fitting a warm roof and applying the liquid system on top. Where approval applies, we deal with the paperwork; details are on the building regulations page.
What's included?
- Surface cleaning, repairs and removal of loose material
- Fleece-reinforced liquid membrane applied to the specified thickness
- Primer matched to the substrate
- Top coat with optional anti-slip finish, and guarantee registration where available
Building control in Northern Ireland
In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.
Which nearby areas do we also cover?
Liquid-applied roofing in Warrenpoint: questions
Do you cover Warrenpoint?
Yes. Warrenpoint is part of our County Down coverage, including postcode districts BT34. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Warrenpoint?
Where the work needs approval it goes to Newry, Mourne and Down District Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a liquid-applied roof cost in Warrenpoint?
£1,800–£2,850 for a typical 18 m² garage roof in a liquid-applied system, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
What is a fleece-reinforced liquid roof?
It is a liquid membrane with a polyester fleece embedded between coats. The fleece adds strength, helps control thickness and resists cracking where the surface moves slightly.
Does a liquid roof smell when it is applied?
Some systems, particularly PMMA, have a strong odour during application, while many polyurethane and water-based products are milder. We tell you what to expect and plan around windows and vents.