Barrow-in-Furness at a glance
- Postcode districts
- LA14
- Population
- about 55,489 (GeoNames)
- Council area
- Westmorland and Furness Council
- Building approval
- Westmorland and Furness Council building control, or a registered building control approver
- Guide price region
- North West (−5% on West Midlands rates)
Why choose a liquid-applied roof in Barrow-in-Furness?
Liquid roofing suits a roof in Barrow-in-Furness that is full of penetrations, such as soil pipes, vents, aerial brackets and rooflights, because the liquid flows around each one and cures into a single skin. There are no cut pieces or taped corners to work loose over time.
In and around Barrow-in-Furness, flat roofs are typically found on lock-up garage blocks on estates, and on low-rise post-war blocks of flats. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour.
How much does a liquid-applied roof cost in Barrow-in-Furness?
At North West guide rates, a typical 18 m² garage roof in a liquid-applied system comes to £1,950–£3,100 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), liquid-applied | £1,950–£3,100 |
| Balcony (12 m²), liquid-applied, scaffold | £1,800–£3,100 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
Can a liquid roof go over my existing roof, and what preparation is needed?
Yes, if the existing roof is dry, firmly bonded and sitting on a sound deck. A liquid membrane is only as good as what lies beneath it, so we test the old roof before agreeing to overlay it.
At survey we check for:
- Trapped moisture: soft spots, blisters or wet insulation mean the roof should be stripped, because water sealed in will cause new blisters and decay.
- Deck condition: any sponginess or deflection needs repair first.
- Adhesion: on felt and asphalt, loose areas are cut out and patched, and the existing surface must take the primer properly.
- Falls and ponding: a coating follows the roof as it is. If water ponds now, it will pond on the new surface too unless the falls are corrected.
Preparation then follows: loose chippings removed, the surface cleaned and left to dry, blisters cut back and repaired, cracks filled, and the right primer applied. On older felt, mineral surfaces may need extra cleaning to give a good bond. Where the tests fail, we say so plainly and quote for a strip and re-roof. Read more on ponding water.
What's included?
- Surface cleaning, repairs and removal of loose material
- Fleece-reinforced liquid membrane applied to the specified thickness
- Survey of the existing roof, including moisture and adhesion checks
- Primer matched to the substrate
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Liquid-applied roofing in Barrow-in-Furness: questions
Do you cover Barrow-in-Furness?
Yes. Barrow-in-Furness is part of our Cumbria coverage, including postcode districts LA14. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Barrow-in-Furness?
Where the work needs approval it goes to Westmorland and Furness Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a liquid-applied roof cost in Barrow-in-Furness?
£1,950–£3,100 for a typical 18 m² garage roof in a liquid-applied system, at North West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can liquid roofing stop a leak on a flat roof?
It can, if the leak is at a detail or the membrane is worn but the roof beneath is sound. If water has soaked the insulation or deck, coating over it will not cure the problem.
How long does a liquid roof take to cure?
That depends on the product and the weather. Some systems are rain-resistant within an hour or so, others take longer, and full cure can take a day or more in cool weather.