Liquid-applied roofing across Derbyshire

Price per m²

£88–£137

Typical life

10–25+ years by product

Manufacturer guarantees

10, 15 or 20-year guarantees by named system

Typical garage roof

£2,000–£3,200

How much does a liquid-applied roof cost in Derbyshire?

Guide prices including VAT at East Midlands rates. The fixed price comes after a free survey for new and replacement roofs.

Which flat roofs are common in Derbyshire?

Flat roofs in Derbyshire sit on lock-up garage blocks on estates, low-rise post-war blocks of flats and shops with flat-roofed rear stores below flats. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Derbyshire the application goes to Derby City Council, Chesterfield Borough Council, Erewash Borough Council and 4 other councils. More on the rules.

Do building regulations apply if a liquid coating goes over my roof?

They can. In England, Wales and Northern Ireland, re-covering more than half of a roof over a heated room is usually renovation of a thermal element, even when the new membrane goes over the old, so the roof should be insulated towards the renovation standard where feasible; for a Scottish property, the local building standards team will confirm whether a warrant is required.

A minor coating repair to a small area is different from re-covering the whole roof. Where insulation is needed, an overlay is not always practical, because the insulation has to go under a new waterproof layer. In that case we may recommend stripping to the deck, fitting a warm roof and applying the liquid system on top. Where approval applies, we deal with the paperwork; details are on the building regulations page.

When is a liquid roof the best option, and when is it not?

A liquid roof is often the best option for roofs crowded with pipes, vents and upstands, for balconies and walkways, and for overlaying a structurally sound roof that is starting to fail. It is the wrong choice when the deck is rotten, the insulation is wet or the falls are badly wrong.

Advantages: continuous finish with no laps; forms details around pipes and odd shapes easily; cold-applied with no flame; can often go over felt, asphalt or concrete; some systems take foot traffic.

Disadvantages: higher cost per square metre than felt or EPDM; needs dry weather and careful thickness control; only as good as the surface it is bonded to; product quality varies widely across the market.

For a straightforward re-roof on a fresh deck, EPDM or GRP may offer better value. Larger flat areas suit torch-on felt or single-ply. On a sound mastic asphalt roof, a compatible liquid system can sometimes be applied over it. See also our guide to overlay or strip.

Which towns in Derbyshire do we cover?

• Derby
• Chesterfield
• Long Eaton
• Ilkeston
• Swadlincote
• Staveley
• Belper
• Heanor
• Alfreton
• Dronfield
• Ripley
• Buxton
• New Mills
• Glossop
• Sinfin

Everything about liquid-applied roofing → · All flat roofing in Derbyshire →