Flat RoofingContractors

Flat roof systems

Liquid-applied roofing in South Shields

Liquid membranes give South Shields property owners a jointless, cold-applied roof without laps or separate flashings. They are especially useful around pipes, rooflights and tight corners where sheet systems need lots of cutting. If the roof below is wet or rotten, we say so and quote for the right fix instead.

Grey liquid waterproofing and reinforcement fleece rolled around a vent pipe on a flat roofComputer-generated example image

South Shields at a glance

Postcode districts
NE33
Population
about 83,655 (GeoNames)
Council area
South Tyneside Council
Building approval
South Tyneside Council building control, or a registered building control approver
Nearest main town
Sunderland, about 7 miles
Guide price region
North East (−7% on West Midlands rates)

Why choose a liquid-applied roof in South Shields?

Choose liquid roofing in South Shields when the shape of the roof makes sheet materials awkward: curved edges, small dormers with many corners, or a mix of levels joined by short upstands. Each detail is reinforced in the same material as the main area, so the whole roof is continuous.

In a large town like South Shields, flat roofs are commonly found on lock-up garage blocks on estates or 1960s and 1970s link-detached houses with flat-roofed garages and porches. England averages roughly 870 mm of rain a year; the North East is drier than the west but cold and windy near the coast, so wind uplift and freeze-thaw are in the specification.

How much does a liquid-applied roof cost in South Shields?

At North East guide rates, a typical 18 m² garage roof in a liquid-applied system comes to £1,900–£3,000 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), liquid-applied£1,900–£3,000
Balcony (12 m²), liquid-applied, scaffold£1,750–£3,000
Single garage (18 m²), EPDM rubber£1,500–£2,600
Extension (20 m²), EPDM, new deck + insulation£2,600–£4,550

Can a liquid roof go over my existing roof, and what preparation is needed?

Yes, if the existing roof is dry, firmly bonded and sitting on a sound deck. A liquid membrane is only as good as what lies beneath it, so we test the old roof before agreeing to overlay it.

At survey we check for:

  • Trapped moisture: soft spots, blisters or wet insulation mean the roof should be stripped, because water sealed in will cause new blisters and decay.
  • Deck condition: any sponginess or deflection needs repair first.
  • Adhesion: on felt and asphalt, loose areas are cut out and patched, and the existing surface must take the primer properly.
  • Falls and ponding: a coating follows the roof as it is. If water ponds now, it will pond on the new surface too unless the falls are corrected.

Preparation then follows: loose chippings removed, the surface cleaned and left to dry, blisters cut back and repaired, cracks filled, and the right primer applied. On older felt, mineral surfaces may need extra cleaning to give a good bond. Where the tests fail, we say so plainly and quote for a strip and re-roof. Read more on ponding water.

What's included?

  • Fleece-reinforced liquid membrane applied to the specified thickness
  • Top coat with optional anti-slip finish, and guarantee registration where available
  • Surface cleaning, repairs and removal of loose material
  • Survey of the existing roof, including moisture and adhesion checks

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Liquid-applied roofing in South Shields: questions

Do you cover South Shields?

Yes. South Shields is part of our Tyne and Wear coverage, including postcode districts NE33. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in South Shields?

Where the work needs approval it goes to South Tyneside Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a liquid-applied roof cost in South Shields?

£1,900–£3,000 for a typical 18 m² garage roof in a liquid-applied system, at North East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is liquid roofing the same as a roof paint?

No. A proper liquid-applied membrane is built to a specified thickness and usually reinforced with fleece, while roof paints and simple coatings are much thinner and mainly used to extend the life of an existing covering.

Can liquid roofing be applied in the rain?

No. The surface must be dry, and most systems need a dry window while they cure. Some fast-curing products shorten that window, but the team will not apply onto a damp roof.

Other flat roof work in South Shields

Liquid-applied roofing in South Shields: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price