Flat RoofingContractors

Roofs we replace and build

Porch, bay and canopy roofs across Oxfordshire

Most porch and bay roofs in Oxfordshire are re-covered in a single day, using a tower or a small scaffold for safe access. Our vetted roofing teams, working under S&K, strip the old covering, check the deck, lay the new membrane and finish the edges, leaving the site tidy and your paperwork in hand.

Edwardian bay window and front porch with new small flat roofs and aluminium trimsComputer-generated example image
Guide price
£850–£1,400
Survey
Free for new and replacement roofs
Quote
Fixed, in writing
Coverage
England, Wales, Scotland, NI

Oxfordshire at a glance

Largest towns
Oxford, Banbury, Abingdon, Bicester
Postcode areas
OX
Building control
Oxford City Council, Cherwell District Council, Vale of White Horse District Council and 2 other councils
Neighbouring areas
Buckinghamshire · Berkshire · Bedfordshire · Warwickshire
Guide price region
South East (+10% on West Midlands rates)

How much does a porch or bay roof cost in Oxfordshire?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Porch or bay (4 m²), EPDM£850–£1,400
Single garage (18 m²), EPDM rubber£1,750–£3,100
Extension (20 m²), GRP, new deck + insulation£3,300–£5,900

Which flat roofs are common in Oxfordshire?

Flat roofs in Oxfordshire sit on 1960s and 1970s link-detached houses with flat-roofed garages and porches, terraced streets with flat-roofed rear kitchens and bathrooms and newer estates where the first extension roofs are now being replaced. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Oxfordshire the application goes to Oxford City Council, Cherwell District Council, Vale of White Horse District Council and 2 other councils. More on the rules.

Do I need permission to re-roof a porch or bay?

Usually not. Re-covering a porch or bay roof without materially changing how it looks does not normally need planning permission, and an unheated open porch is not usually a thermal element.

The picture changes if the bay or porch is part of a heated room: replacing most of the roof can then bring it under the insulation rules for renovated roofs, which may need building control approval in England, a check in Wales, building standards in Scotland or district council building control in Northern Ireland. On a very small roof, adding insulation may not be technically feasible because of the height available below the window sill above. We assess that at survey.

Listed buildings need consent for changes that affect their character, and conservation areas can restrict changes to the front of a house. See our building regulations page for more detail.

Which material looks best on a porch or bay roof?

For most porches, EPDM rubber gives a neat, dark grey finish that sits quietly on the front of a house, and on a small roof it can usually be laid as one piece. For angled bays and curved canopies, GRP fibreglass or a liquid-applied system follows the shape without folds or joins.

Many older bay windows and porches were finished in lead, which has a distinctive look. Where you want to keep that appearance, especially on a period house, we can discuss a lead-look finish or retaining lead flashings at the wall. On a listed building or in a conservation area, changing from lead to a membrane may need consent, so we check that at survey.

Colour matters more here than on a hidden rear roof. GRP topcoats come in several colours, and EPDM is typically black or dark grey.

Which towns in Oxfordshire do we cover?

Porch, bay and canopy roofs in Oxfordshire: questions

Which towns in Oxfordshire do you cover?

All of Oxfordshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a porch or bay roof cost in Oxfordshire?

£850–£1,400 for a small 4 m² porch or bay roof in EPDM, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which postcode areas do you cover in Oxfordshire?

All of Oxfordshire, including the OX postcode areas. Send your full postcode and we'll confirm.

Can a canopy over a front door be re-covered?

Yes. Small canopies are re-covered in the same way as porches, usually in EPDM or GRP, subject to the minimum charge.

Why is my porch roof leaking when the felt looks fine?

The water is often coming from the wall junction, not the roof surface. A failed flashing, cracked mortar or porous brick above can let water in behind the upstand.

Does a porch roof need a gutter?

Not always. Many small porches drip straight off the front edge, but a gutter helps over a doorway or path.

Everything about porch, bay and canopy roofs → · All flat roofing in Oxfordshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price